GroupInfo
GroupInfo
This menu displays configurable and read-only information on each of the device’s groups.
Table 5-12 describes each field in the GroupInfo menu.
| Table 5-12 GroupInfo Menu |
| |
Field | Description |
| |
Index | Read-only field; displays the number of the entry in |
| the Group Basic Info Table. |
| |
Physical Addr | Read-only field; displays the ID of this group (it uses |
| the MAC address of the first port in this group as the |
| ID). |
| |
State | Configurable field; enables or disables the group |
| within the device stack. |
| |
Ports | Read-only field; displays the number of ports (includ- |
| ing MII expansion ports) contained in this group. |
| |
Module Type | Read-only field; displays the type of module of the |
| selected group. |
| |
Description | Read-only field; displays a description of this group. |
| |
FanStatus | Read-only field; displays the status of the group’s fan. |
| ❏ normal — the fan is in good condition |
| ❏ no-fan— no fan is in this module |
| ❏ fail — the fan is in “failed’ condition |
| ❏ fan-1 bad — fan #1 is in “failed” condition |
| ❏ fan-2 bad — fan #2 is in “failed” condition |
| ❏ fan-1-2 bad — fan #1 and fan #2 are in |
| “failed” condition |
| |
ExpPorts | Read-only field; displays the number of expansion |
| ports in this group. |
| |
LastChange | Read-only field; displays the sysUpTime of last |
| change of group status since this group has been in |
| operation. |
Reset
Configurable field; resets the selected group.