Management
Configuring Spanning Tree Parameters
To configure the Spanning Tree Parameters on the IntraStack:
▲Important: Do not change any of the Spanning Tree parameters unless you have knowledge and experience with the IEEE 802.1d specification.
1
2
Do not select any item on the
Click Spanning.
The Spanning Tree Device table appears, similar to Figure
Figure 4-17 Spanning Tree Device table
ΔNote: For a description of each field, see “Span- ning” on page
3 Within this table, you can configure the following information:
❏Spanning Tree Priority
❏Bridge Maximum Age
❏Bridge Hello Time
❏Bridge Forward Delay
4 Click once in the Spanning Tree parameter field to be modified.
Page