Aiwa CX-NA222 manual Connect the right and left speakers to the main unit

Check your system and accessories

=

CX-NA222 Compact disc stereo cassette receiver SX-NA332 Front speakers

CX-NA222 Compact disc stereo cassette receiver SX-NA335 Front speakers

SX-R275 Surround speakers

IMPORTANT

Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord,

There are no differences between the front speakers. Both speakers can be connected as L (left) or R (right).

7 Connect the right and left speakers to the main unit.

Connect the right speaker cord to SPEAKERS R terminals, and left to SPEAKERS L terminals.

The speaker cord with the white stripe should be connected to @ terminal and the black cord to 0 terminal.

Operating Instructions, etc

*Optional SX-R275 Surround speakers are available with the NSX-A222,

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is

120 V AC. Check that the rated voltage matches your local voltage,

2 Connect the surround speakers to the main unit, (only for NSX-A223)

There are no differences between the surround speakers. Connect each surround s~eaker cord to SURROUND SPEAKERS R or L terminal. ”

#

Q