Refer to the operating instructions of the connected equipment for details.
●The connecting cords are not supplied. Obtain the necessary connecting cords.
●Consult your local Aiwa dealer for optional equipment.
This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white plug to the VIDEO/AUX L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a
This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack,
When the CD DIGITAL OUT (OPTICAL) jack is not being used
Attach the supplied dust cap.
Connect optional surround speakers with the 8 ohms to 16 ohms impedance to the jacks,
POWER
To play equipment connected to the VIDEO/AUX jacks proceed as follows.
1 Press VIDEO/AUX.
“VIDEO”appears on the display.
2 Play the connected equipment.
To change a source name in the display
When VIDEO/AUX is pressed, “VIDEO”is displayed initially. It can be changed to “VIDEO, “AUX or “TV.
With the power on, press POWER while pressing VIDEO/AUX. Repeat the procedure to select one of the names.