Motorola MVME3100 manual MVME721 LED Status Indicators, Additional Onboard Status Indicators

Chapter 2 Startup and Operation

Table 2-1. Front-Panel LED Status Indicators (continued)

		Function			Label		Color			Description
		GENET 1 Link /			SPEED		Off			No link
		Speed
							Yellow			10/100Base-T operation
							Green			1000Base-T operation
		GENET 1			ACT		Blinking Green			Activity proportional to bandwidth utilization.
		Activity
							Off			No activity
	The MVME721 rear transition module also has four status indicators. The following table
	describes these indicators:
Table 2-2. MVME721 LED Status Indicators
Function				Label		Color			Description
GENET 2 Link/Speed				SPEED		Off			No link
						Yellow			10/100Base-T operation
						Green			1000Base-T operation
GENET 2 Activity				ACT		Blinking Green			Activity proportional to bandwidth utilization.
						Off			No activity
ENET 1 Link/Speed				SPEED		Off			No link
						Yellow			10/100Base-T operation
ENET 1 Activity				ACT		Blinking Green			Activity proportional to bandwidth utilization.
						Off			No activity
Table 2-3. Additional Onboard Status Indicators
Function			Label		Color			Description
User Defined			DS7		Green			This indicator is illuminated by software assertion of its
LED 2			(silkscreen)					corresponding register bit.
User Defined			DS8		Green			This indicator is illuminated by software assertion of its
LED 3			(silkscreen)					corresponding register bit.
Power Supply			DS1		Red			This indicator is illuminated to indicate a power supply fail
Fail			(silkscreen)					condition.
sATA 0			DS4		Green			sATA 0 or 1 activity in legacy mode (default). sATA 0 activity in
Activity			(silkscreen)					DPA mode.

12MVME3100 Installation and Use (V3100A/IH1)