Motorola MVME3100 manual Functional Description

Chapter 4 Functional Description

Table 4-1. MVME3100 Features Summary (continued)

Feature	Description
PCI Interface	Bus A:
	– 66 MHz PCI or PCI-X mode (switch selectable)
	– One TSi148 VMEbus controller
	– One serial ATA (sATA) controller
	– One MPC8540
	– Two PCI6520 PCI-X-to-PCI-X bridges (primary side)
	Bus B:
	– 33/66/100 MHz PCI/PCI-X (PCI 2.2 and PCI-X 1.0b compliant)
	– Two +3.3V/5V selectable VIO, 64-bit, single-wide PMC sites or
	one double-wide PMC site (PrPMC ANSI/VITA 32-2003 and PCI-X
	Auxiliary ANSI/VITA 39-2003 compliant)
	– One PCI6520 PCI-X-to-PCI-X bridge (secondary side)
	Bus C (-1263 version):
	– 33 MHz PCI (PCI 2.2 compliant)
	– One USB 2.0 controller
	– One PCI expansion connector for interface to PMCspan
	– One PCI6520 PCI-X-to-PCI-X bridge (secondary side)
I/O	– One front panel RJ45 connector with integrated LEDs for front I/O:
	one serial channel
	– One front panel RJ45 connector with integrated LEDs for front I/O:
	one 10/100/1000 Ethernet channel
	– One front panel external sATA data connector for front I/O: one
	sATA channel
	– One front panel USB Type A upright receptacle for front I/O: one
	USB 2.0 channel (-1263 version)
	– PMC site 1 front I/O and rear P2 I/O
	– PMC site 2 front I/O
Serial ATA	– One four-channel sATA controller: one channel for front-panel I/O,
	one channel for planar I/O, one channel for future rear P0 I/O, and
	one channel is not used
	– One planar data connector and one planar power connector for
	an interface to the sATA hard disk drive
USB (-1263 version)	– One four-channel USB 2.0 controller: one channel for front panel
Ethernet	– Two 10/100/1000 MPC8540 Ethernet channels for front-panel I/O
	and rear P2 I/O
	– One 10/100 MPC8540 Ethernet channel for rear P2 I/O
Serial Interface	– One 16550-compatible, 9.6 to 115.2 KBAUD, MPC8540,
	asynchronous serial channel for front-panel I/O
	– One quad UART controller to provide four 16550-compatible, 9.6
	to 115.2 KBAUD, asynchronous serial channels for rear P2 I/O
Timers	– Four 32-bit MPC8540 timers
	– Four 32-bit timers in a PLD
Watchdog Timer	– One MPC8540 watchdog timer

36MVME3100 Installation and Use (V3100A/IH1)