Fostex MR-8HD/CD supplementary manual About Track at once and Disk at once

Page 10

MR-8HD/CD Supplementary manual

About "Track at once" and "Disk at once"

The MR-8HD/CD provides two burning modes for creating an audio CD in the CD-DA format.

"Track at once"

The unit burns a stereo WAV file to a CD-R/RW disc as a track. You can burn an additional track at a later time until the disc is finalized. Each time you burn a file, a TOC is created. Approximately two-second silence is automatically inserted between tracks.

"Disk at once"

The unit burns a stereo WAV file and automatically finalizes the disc. You cannot burn an additional data. As described earlier in "2 MIX file playback mode", when one or more CUE points are set to the stereo WAV file, file data is divided into tracks at the CUE points.

In this mode, no mute space is created between tracks. (Note that if the stereo WAV file does not have any CUE point, it is burned as a single track.)

The following is assumed that a song which has a stereo WAV file in the "2 MIX folder" is loaded.

1)Set a blank CD-R/RW disc to the CD-R/RW drive.

You can select between "Track at once" and "Disk at once".

2)While the unit is stopped, press the [MENU/ENTER] knob to enter the MENU mode.

The display now shows the first page of the menu selection screen.

3)Use the [MENU/ENTER] knob to select "CD-RW " on the second page and press the [MENU/ENTER] knob.

The display now shows the CD-RW menu screen.

4)Use the [MENU/ENTER] knob to select "CD Burn " and press the [MENU/ENTER] knob.

The display now shows the Burning mode selection screen.

5)Use the [MENU/ENTER] knob to select the desired burning mode and press the [MENU/ENTER] knob.

The display now shows the screen for selecting a stereo WAV file in the "2 MIX folder" of the current song.

In the screen example below, only one stereo WAV file is stored.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents