Fostex MR-8HD/CD supplementary manual After editing the start time, press the MENU/ENTER knob

Page 18

MR-8HD/CD Supplementary manual

3)Use the [MENU/ENTER] knob to select "Song Export " and press the [MENU/ENTER] knob.

The display now shows the screen for setting the start time, end time and exported tracks. The display now highlights “[EXECUTE]”.

5)After editing the start time, press the [MENU/ENTER] knob.

"Start Time: *m **s ***" is now highlighted.

6)Use the [MENU/ENTER] knob to select

"EndTime" and press the [MENU/ENTER] knob.

You can now edit the end time of the exported file(s).

By default, these items are set as follows.

•Start time: The beginning of a song (ABS 0)

•End time:The last recording position of a song

•Track selection: All tracks (1 through 8)

In other words, by default, you can export full length of all tracks. If you export a song data with the default setting above, skip to step 10. If you edit the setting, go to steps 4 through 9.

Flashing

7)After editing the end time, press the [MENU/ENTER] knob.

"End Time: *m **s ***" is now highlighted.

4)Use the [MENU/ENTER] knob to select "StartTime: 0m 00s 000" and press the [MENU/ENTER] knob.

You can now edit the start time of the exported file(s).

8)Use the [MENU/ENTER] knob to select "TRK" and press the [MENU/ENTER] knob.

You can now select the exported tracks. Selected tracks are highlighted.

Only TRK "1" flashes.

Flashing

Flashing

<How to edit a time>

To edit the start or end time of the ex- ported file(s), use either of the following operation methods.

<Note>: A blank track is not highlighted.

• Using the [MENU] dial:

Use the [REWIND] or [F FWD] key to move the editing point and use the [MENU/ENTER] knob to edit the value.

• Using the numeric keys:

Directly enter a desired number using the appropriate numeric key. Each time you press a numeric key, the entered numbers on the screen move from the right towards the left. You can also use the [REWIND] or [F FWD] key to move the editing point.

<How to select or deselect a track>

Rotating the [MENU/ENTER] knob left dese- lects the flashing track, while rotating the [MENU/ENTER] knob right selects the flash- ing track.

Use the [F FWD] and [REWIND] keys to se- lect the flashing track.

9)After selecting/deselecting the exported tracks, press the [MENU/ENTER] knob.

"TRK" is now highlighted.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents