Fostex MR-8HD/CD supplementary manual Before creating an audio CD playing back a stereo WAV file

Page 5

MR-8HD/CD Supplementary manual

Before creating an audio CD (playing back a stereo WAV file)

The unit provides the "2 MIX file playback mode". In this mode, you can playback a stereo WAV file converted for creating an audio CD in the CD-DA format. You can not only check the file but also set CUE points for track division.

<Note>: To activate the "2 MIX file playback mode", the current song has a stereo WAV file in the "2 MIX folder". If the song does not have a stereo WAV file in the "2 MIX folder", you cannot use the "2 MIX file playback mode". In the "2 MIX file playback mode", you can play back the stereo WAV file, as well as store or edit CUE points, but cannot record audio or make track/part editing.

Selecting a stereo WAV file for playback

The following shows how to select a desired stereo WAV file from the "2 MIX folder" of the current song. It is assumed that a song which has a stereo WAV file in the "2 MIX folder" is currently loaded.

1)While the unit is stopped, press the [MENU/ENTER] knob to enter the MENU mode.

The display now shows the menu selection screen, where " Back" is initially highlighted.

2)Use the [MENU/ENTER] knob to select "Song " and press the [MENU/ENTER] knob.

The display now shows the song menu screen.

3)Use the [MENU/ENTER] knob to select "Select 2mix " and press the [MENU/ENTER] knob.

The display now shows the list of stereo WAV files available in the "2 MIX folder" of the current song.

<Note>: If no stereo WAV file is available in the "2 MIX folder" of the current song, the dis- play pops up "No stereo files!" and returns to the screen where "Select 2mix " is highlighted. In such a case, exit the MENU mode and reselect a song.

4)Use the [MENU/ENTER] knob to select the desired stereo WAV file and press the [MENU/ENTER] knob.

The display now shows the Home screen of the "2 MIX file playback mode".

While this Home screen is shown, you can play back the stereo WAV file or store CUE points.

<Note>: To exit the Home screen of the

"2 MIX file playback mode", execute steps 1 and 2 above, and select "Select Song " and press the [MENU/ENTER] knob. Then use the [MENU/ENTER] knob to select the desired song and press the [MENU/ENTER] knob.

The song is loaded.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 449478 MR-8HD/CD Supplementary manual How to use the CD-R/RW driveTable of contents Usable discs Please read before usingTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file While Enter is highlighted, press the MENU/ENTER knob Faders for tracks 1 Master fader Play keyWhile the unit is stopped, press the Store key Entering a CUE labelEditing a CUE position How to handle the internal CD-R/RW drive Creating an audio CD using the internal CD-R/RW driveSet a blank CD-R/RW disc to the CD-R/RW drive About Track at once and Disk at onceNow writing Track at once mode Disk at once mode Writing four stereo WAV files in the Track at once mode Press the Stop key to exit the Menu modeViewing the TOC information Close the ejected disc tray of the CD-R/RW drive Viewing the TOC information after finalizingCD-DA disc Importing track data on a CD-DA discFlasjing WAV Exporting song data to a CD-R/RW discAfter editing the end time, press the MENU/ENTER knob After editing the start time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents