Fostex MR-8HD/CD supplementary manual Now writing Track at once mode is completed

Page 24

MR-8HD/CD Supplementary manual

6)Use the [MENU/ENTER] knob to select the desired WAV file and press the [MENU/ENTER] knob.

The unit starts writing the file to the CD-R/RW disc. Depending on the selected burning mode, either of the following screens is shown.

While the unit is writing data to the disc,

"Writing..." is popped up and " ACC " is flashing on the screen.

Also the ACCESS indicator of the CD-R/RW drive is flashing. Do not turn off the power or press the eject switch of the drive while writing.

While writing data to the disc, any operational keys of the MR-8HD/CD are disabled.

Now writing in the Track at once mode

Now writing in the Disk at once mode

<Note>: If the selected stereo WAV file is larger than the available disc space of the current CD- R/RW disc, the following message pops up and you cannot start writing (you can dismiss the message by pressing the [MENU/ENTER] knob). Change the disc to another one with enough space and carry out the same opera- tion procedure.

When writing is completed, "Completed!" is shown and the disc access stops.

Now writing in the

Disk at once mode is completed

7)Press the [MENU/ENTER] knob.

The display returns to the USB HOST menu screen, where "CD Burn " is highlighted.

When the disc is burned in the "Disk at once" mode, it is automatically finalized after writing is completed, and then ejected.

You can check the TOC information if desired. See "Viewing the TOC information after finaliz- ing" on page 27 for details.

When the disc is burned in the "Track at once" mode, go to step 8 for finalizing the disc.

If you want to write more than one stereo WAV file, repeat steps 4 through 6 above, and go to step 8 for finalizing after writing all the desired stereo WAV files.

You can check the TOC information any time (both before and after finalizing). It is recom- mended to check the remaining time (the re- cordable time left) from the TOC information whenever you write an additional stereo WAV file (see "Viewing the TOC information" on page 26 for details).

8)Use the [MENU/ENTER] knob to select

"CD Finalize " and press the [MENU/ENTER] knob.

The display now shows the confirmation screen for finalizing, where "[CANCEL]" is highlighted.

To cancel finalizing, highlight "[CANCEL]" and press the [MENU/ENTER] knob.

To start finalizing, highlight "[EXECUTE]" and press the [MENU/ENTER] knob.

Now writing in the

Track at once mode is completed

24

Image 24
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478