Fostex MR-8HD/CD supplementary manual Press the Stop key to exit the Menu mode

Page 12

MR-8HD/CD Supplementary manual

11) Press the [STOP] key to exit the MENU mode.

You can also exit the MENU mode by selecting " Back" and pressing the [MENU/ENTER] knob repeatedly.

The following shows how audio CD data is written to a CD-R/RW disc in the "Track at

once" or "Disk at once" mode.

• Writing a single stereo WAV file in the "Track at once" mode:

9)Use the [MENU/ENTER] knob to select “[EXECUTE]” and press the [MENU/ENTER] knob.

The display now shows the status of finalizing. When finalizing is completed, "Completed!" is shown and the disc is automatically ejected from the CD-R/RW drive.

Track 1

Writing four stereo WAV files in the "Track at once" mode:

A two-second silence is automatically inserted between tracks.

Track 1

Track 2

Track 3

Track 4

: Approximately two-second silence (mute)

<Note>: Once you finalize a disc written in the "Track at once" mode, you cannot make addi- tional writing any more. If you reload the final- ized disc and attempt to write a file, "Already Finalized" is popped up and operation is can- celled.

10)Press the [MENU/ENTER] knob.

The display returns to the CD-RW menu screen, where "CD Finalize " is highlighted.

Writing a single stereo WAV file with only CUE01 in the "Disk at once" mode:

Track 1

Writing a single stereo WAV file with three CUE points in addition to CUE01 in the "Disk at once" mode:

The file is divided into four tracks with no silence between tracks.

Track 1

Track 2

Track 3

Track 4

You can check the TOC information after final- ized. See "Viewing the TOC information after finalizing" on page 14 for details.

12

Image 12
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478