Fostex MR-8HD/CD supplementary manual How to select a file manually

Page 21

To start importing files, select "[YES]".

To cancel importing files, select "[NO]".

6)Use the [MENU/ENTER] knob to select "[YES]" and press the [MENU/ENTER] knob.

The unit starts importing files. When importing is completed, "Completed!" is shown and the disc access stops.

7)Press the [MENU/ENTER] knob.

The display now shows the CD-RW menu screen where "Song Import " is highlighted.

8)Press the [STOP] key to exit the MENU mode.

You can also exit the MENU mode by selecting " Back" and pressing the [MENU/ENTER] knob repeatedly.

<Hint>: As mentioned in <Note> on page 20, if a file to be imported exists in the folder but does not have a proper file name which con- forms to the specified format, it is not automati- cally set as an imported file. In such a case, you can manually set the file by following the procedure below.

MR-8HD/CD Supplementary manual

<How to select a file manually>

The following procedure shows how to set a file to be imported to "TR06". To set a file to "TR07" or "TR08", follow the similar procedure.

1)Use the [MENU/ENTER] knob to select "TR06" and press the [MENU/ENTER] knob.

The display now shows the screen for selecting a file to be imported. On the right of " Back", the selected track is shown ("TR06", in this example).

On the second page of the screen, files with no track number in their names are shown.

2)Use the [MENU/ENTER] knob to select the desired file and press the [MENU/ENTER] knob.

The selected file is set to "TR06" and the display returns to show the screen for selecting a file to be imported (in the screen example below, Song02.wav is set to "TR06").

<Hint>: Using the method above, you can replace the currently selected WAV file with another file. If you want to delete the currently selected WAV file, press the [MENU/ENTER] knob after selecting the desired track, and after confirming that "[DELETE]" is highlighted on the screen above, press the [MENU/ENTER] knob again.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 449478 MR-8HD/CD Supplementary manual How to use the CD-R/RW driveTable of contents Usable discs Please read before usingTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file While Enter is highlighted, press the MENU/ENTER knob Faders for tracks 1 Master fader Play keyWhile the unit is stopped, press the Store key Entering a CUE labelEditing a CUE position How to handle the internal CD-R/RW drive Creating an audio CD using the internal CD-R/RW driveSet a blank CD-R/RW disc to the CD-R/RW drive About Track at once and Disk at onceNow writing Track at once mode Disk at once mode Writing four stereo WAV files in the Track at once mode Press the Stop key to exit the Menu modeViewing the TOC information Close the ejected disc tray of the CD-R/RW drive Viewing the TOC information after finalizingCD-DA disc Importing track data on a CD-DA discFlasjing WAV Exporting song data to a CD-R/RW discAfter editing the end time, press the MENU/ENTER knob After editing the start time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents