Fostex MR-8HD/CD supplementary manual Viewing the TOC information after finalizing

Page 14

MR-8HD/CD Supplementary manual

Viewing the TOC information after finalizing

The following assumes that a disc automatically finalized after "Disk at once" writing or a disc finalized after "Track at once" writing is ejected from the internal CD-R/RW drive, while the display shows the CD-RW menu screen where "CD Finalize " is highlighted.

1)Close the ejected disc tray of the CD-R/RW drive.

Push the front of the disc tray gently by hand. The finalized disc is loaded.

Confirm that the "CD Finalize " is highlighted on the screen.

<Note>: When you close the tray, the drive starts reading the disc and the access indica- tor starts flashing. Therefore, do not carry out the next operation until the drive stops access- ing and the access indicator gets unlit.

2)Use the [MENU/ENTER] knob to select

"CDTOC" and press the [MENU/ENTER] knob.

The display shows "Please Wait...", followed by the TOC information, as with "Viewing the TOC information before finalizing".

However, in this case, the remaining time is shown as "0h 00m 00s", which means no more track can be recorded to this finalized disc.

<Note>: When you burn multiple stereo WAV files by "Track at once" and finalized or you burn a stereo WAV file with multiple CUE points by "Disk at once", the Track list screen looks like the one below (the remaining time is shown as "0h 00m 00s", of course).

<Note>: You can also view the TOC of a com- mercially available audio CD, as with an audio CD you create using the MR-8HD/CD. (Note that some commercially available audio CDs may not show the TOC information.)

To do this, set an audio CD to the CD-R/RW drive and carry out the same operation as de- scribed above using the "CD-RW" menu in the MENU mode.

Note that you can view only the playing time of each track. You cannot view track titles.

3)After checking the TOC information, use the [STOP] key to exit the MENU mode.

The display returns to the Home screen.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents