Importing a mono WAV file

MR-8HD/CD Supplementary manual

10) Use the [MENU/ENTER] knob to select "[EXECUTE]" and press the [MENU/ENTER] knob.

The unit starts exporting track data to the CD- R/RW disc. When completed, "Completed" is shown on the display and the disc is automatically ejected. If you want to cancel exporting, select to "[CANCEL]" and press the [MENU/ENTER] knob.

11) Press the [MENU/ENTER] knob.

The display now shows the CD-RW menu screen, where "Song Export " is highlighted.

12) Press the [STOP] key to exit the MENU mode.

You can also exit the MENU mode by selecting " Back" and pressing the [MENU/ENTER] knob repeatedly.

You can import (copy) a mono WAV file of track data recorded/edited on a PC or backup data from a CD-R/RW disc to the hard disk of the MR-8HD/CD.

The following description assumes that a CD-R/RW disc which contains one or more mono WAV files is set to the internal CD-R/RW drive, while a "New Song" is loaded to the MR-8HD/CD (see page 31 of the original manual for details about how to create a "New Song").

<Note>: You can import a mono WAV file from a CD-R/RW disc only using the internal CD-R/RW drive.

You cannot import a mono WAV file from a CD-R/RW disc using an external CD-R/RW drive connected to the [USB HOST] port.

CD-R/RW disc which contains a mono

WAV file of track data recorded/edited on a

PC or backup disc

INPUT A SELECT
INPUT A			INPUT B		INPUT C		INPUT D
BAL			BAL		BAL		BAL		STEREO OUT
									L	R
UNBAL							UNBAL		PHONES
/GUITAR	INSERT		UNBAL		UNBAL		UNBAL		1	2
DISTORTION	TRIM		TRIM		TRIM		TRIM		PHONES VOL
MIN MAX LINE		MIC	LINE	MIC	LINE	MIC	LINE	MIC	MIN	MAX
GUITAR	PEAK		PEAK		PEAK		PEAK
	PEAK		PEAK		PEAK		PEAK
	ON/			ON/		ON/		ON/
	OFF			OFF		OFF		OFF
				TO STEREO BUSS					POWER
DYNAMIC			CONDENSER		TUBE		MIC SIMULATION		EFFECT
									REVERB / DELAY TIME
							INPUT A
BRIT STACK			US METAL		60'S COMBO		AMP SIMULATION
									MIN	MAX
									ROOM	HALL

							EFFECT SEND
0	10	0	10	0	10	0	10

PLATE DELAY

				L	R	L	R	PAN
L	R	L	R	L	R	L	R
									REC SELECT
	1		2		3	4	5/6	7/8	MASTER
MAX									MAX
MIN									MIN

RHYTHM	TIME BASE	CONTRAST
GUIDE	SELECT	CONTRAST
1-4 > 5/6	>NEW	7/8 >STEREO
1-6 > 7/8	1-8 SONG	WAV FILE
		BOUNCE
				MENU / ENTER
ABC1	DEF2	GHI3
POWERFUL	NATURAL	BRIGHT
		MASTERING
JKL4	MNO5
		LOCATE
AUTO PUNCH	PLAY MODE	A / IN	B / OUT	STORE	UNDO/REDO
PQR6	STU7	VWX8	YZ9	+-_0	DELETE

RECORD

STOP

PLAY

REWIND

F FWD

LOCATE REC END

LOCATE ABS ZERO

A-B PLAY

MR-8HD/CD

<Note>: When you copy a mono WAV file of track data recorded/edited on a PC to a CD-R/RW disc and then import it to the MR-8HD/CD, give the file name as below.

"{Song name}_{Track number}"

(Example: "My Song_1", "My Song_2" .... "My Song_8")

By giving the file name as above, a file is automatically imported to the corresponding track of the destination song ("My Song_1" to track 1, "My Song_2" to track 2, etc.).

Note that when you import data of a backup disc created by the procedure described in "Exporting song data to a CD-R/RW" above, a file is copied to the same track from which data has been exported.