Fostex MR-8HD/CD supplementary manual File name

Page 20

MR-8HD/CD Supplementary manual

<Note>: If you import a WAV file to a recorded song, the imported file overwrites the existing track data. Note that if the time length of the imported file is shorter than the length of the existing track data, the imported file only overwrites the overlapping part.

The rest part of the original data still remains. Also note that you cannot undo the import operation. If you do not satisfy with the result, press the [UNDO/REDO] key to undo the import operation. The unit returns to the con- dition before importing a track.

1)While the unit is stopped, press the [MENU/ENTER] knob to enter the MENU mode.

The display now shows the first page of the menu selection screen.

2)Use the [MENU/ENTER] knob to select "CD-RW " on the second page and press the [MENU/ENTER] knob.

The display now shows the CD-RW menu screen.

3)Use the [MENU/ENTER] knob to select

"Song Import " on the second page and press the [MENU/ENTER] knob.

The display now shows the screen for selecting the folder on the CD-R/RW disc.

The folders you can import a mono WAV file from are limited to the root folder and subfolder in the next level.

The following screen example shows the root folder (<Root>) and four subfolders (Folder1 through Folder4).

4)Use the [MENU/ENTER] knob to select a folder from which you import a mono WAV file and press the [MENU/ENTER] knob.

The display now shows the screen as below. You can see the name of the file to be imported to each track.

<Note>: If there are files for all tracks (1 through

8)in the screen example above, you can see the screen as below by scrolling down the list.

If no appropriate file to be imported exists for a track in the folder, "--------" is shown instead of

a file name.

The screen example below shows that there are no files for tracks 6, 7 and 8, or there are mono WAV files but file names do not conform to the specified format. In other words, The names of tracks 6, 7 and 8 do not conform to the "{Song name}_{Track number}" format.

In such a case, you can manually set files for tracks 6, 7 and 8 by following the procedure shown on the next page. To continue file im- port operation in the above condition, go to the next step (5).

5)Use the [MENU/ENTER] knob to select "[EXECUTE]" and press the [MENU/ENTER] knob.

The display now shows the confirmation screen for import, where "[NO]" is highlighted.

20

Image 20
Contents MR-8HD/CD Supplementary manual How to use the CD-R/RW drive 449478Table of contents Please read before using Usable discsTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file Faders for tracks 1 Master fader Play key While Enter is highlighted, press the MENU/ENTER knobEntering a CUE label While the unit is stopped, press the Store keyEditing a CUE position Creating an audio CD using the internal CD-R/RW drive How to handle the internal CD-R/RW driveAbout Track at once and Disk at once Set a blank CD-R/RW disc to the CD-R/RW driveNow writing Track at once mode Disk at once mode Press the Stop key to exit the Menu mode Writing four stereo WAV files in the Track at once modeViewing the TOC information Viewing the TOC information after finalizing Close the ejected disc tray of the CD-R/RW driveImporting track data on a CD-DA disc CD-DA discFlasjing Exporting song data to a CD-R/RW disc WAVAfter editing the start time, press the MENU/ENTER knob After editing the end time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478