Fostex MR-8HD/CD supplementary manual Display now shows the USB Host menu screen

Page 23

1)Connect the MR-8HD/CD to the CD-R/RW drive using a USB cable.

2)While the MR-8HD/CD is stopped, press the [MENU/ENTER] knob to enter the MENU mode.

The display now shows the first page of the menu selection screen.

3)Use the [MENU/ENTER] knob to select

"USB HOST " on the second page and press the [MENU/ENTER] knob.

The display now shows the USB HOST menu screen.

4)Use the [MENU/ENTER] knob to select "CD Burn " and press the [MENU/ENTER] knob.

The display now shows the Burning mode selection screen.

You can select between "Track at once" and "Disk at once" (see the previous page).

MR-8HD/CD Supplementary manual

<Note>: If "Not Mounted" is shown when you select "USB HOST " using the [MENU/ENTER] knob in step 3) above, an external CD-R/RW drive is not connected to the MR-8HD/CD cor- rectly.

If you press the [MENU/ENTER] knob in the above condition, the following message pops up.

In such a case, check the USB cable connec- tion while the MR-8HD/CD stops accessing to the HDD drive or CD-R/RW drive. Then con- firming that the display does not show "Not Mounted", press the [MENU/ENTER] knob.

5)Use the [MENU/ENTER] knob to select the desired burning mode and press the [MENU/ENTER] knob.

The display now shows the screen for selecting a stereo WAV file in the "2 MIX folder" of the current song. In the screen example below, only one stereo WAV file is stored.

<Note>: When more than one stereo WAV file is stored in the "2 MIX folder" (as shown in the example below), you can use the [MENU/EN- TER] knob to select a desired file for "CD Burn" (The maximum number of displayed files in the list is ten).

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 449478 MR-8HD/CD Supplementary manual How to use the CD-R/RW driveTable of contents Usable discs Please read before usingTrack data which can be recorded to a CD-R/RW disc Before creating an audio CD playing back a stereo WAV file While Enter is highlighted, press the MENU/ENTER knob Faders for tracks 1 Master fader Play keyWhile the unit is stopped, press the Store key Entering a CUE labelEditing a CUE position How to handle the internal CD-R/RW drive Creating an audio CD using the internal CD-R/RW driveSet a blank CD-R/RW disc to the CD-R/RW drive About Track at once and Disk at onceNow writing Track at once mode Disk at once mode Writing four stereo WAV files in the Track at once mode Press the Stop key to exit the Menu modeViewing the TOC information Close the ejected disc tray of the CD-R/RW drive Viewing the TOC information after finalizingCD-DA disc Importing track data on a CD-DA discFlasjing WAV Exporting song data to a CD-R/RW discAfter editing the end time, press the MENU/ENTER knob After editing the start time, press the MENU/ENTER knobImporting a mono WAV file File name How to select a file manually Creating an audio CD using an external CD-R/RW drive Display now shows the USB Host menu screen Now writing Track at once mode is completed Track Approximately two-second silence mute Viewing the TOC information Viewing the TOC information after finalizing 449478
Top Page Image Contents