Sierra Wireless 595U manual How do I start and stop NMEA?, How do I configure my Nmea port?

How do I start and stop NMEA?

Note:

To ensure the best data performance of your USB modem, it’s recommended that you not activate the NMEA stream unless you are going to use it.

To start NMEA output:

1.Click GO in the GPS Receiver window (page 35).

2.Read and accept the Privacy Consent Agreement.

Tip:

You can turn off the display of the NMEA Privacy Consent Agreement (from the Sprint Location Services settings window)

To stop NMEA output, you have several options:

⬤In the GPS Receiver window, click Stop.

⬤In the Mobile Broadband window, click Stop.

⬤Exit Sprint Connection Manager.

⬤If you have started the GPS application before you started NMEA output: exit the GPS application.

How do I configure my NMEA port?

At the time of this software release, you cannot specify which port Windows uses for NMEA output. Windows automatically uses the next available port.

You can, however, configure the GPS application to use the NMEA Com port that Windows is using (page 90).

Section 3E: Frequently Asked Questions (Windows) 91