Sierra Wireless USB 598 Watcher window, enter the lock code PIN, and click OK, Activate, Modem

Text/window

Description/next action

displayed

“Device is

Your device is preactivated. Unlock the device:

Locked”

1. From the Extras item on the Watcher menu, choose Unlock ... Device.

2. In the Watcher window, enter the lock code (PIN), and click OK.

If you can’t recall your lock code, try using the last four digits of your device’s

phone number (“About Watcher”) or try 0000. If none of these work, contact

your service provider.

Once your device is unlocked, you are ready to connect to the network; see

“Connecting to the network” on page 7.

“Alert” window

Your device is not activated.

(“Watcher is

1. Wait until the process is completed.

attempting to

If activation is successful, Watcher displays only the name of the carrier,

activate the

after which you are ready to connect to the network; see “Connecting to the

modem...”)

network” on page 7.

2. If Watcher displays “Not activated”, use the Activation Assistant (see the next

page).

“Alert” window

Your device is not activated.

(“This device is

1. In the Alert window, click Yes.

not activated...”)

If an Alert window (“Watcher is attempting to activate the modem...”) is

displayed, see the above row.

2. If the Activation Assistant window is displayed, continue from step 2 in the

“Activation Assistant” section (see the next page).

“Not activated” /

Your device is not activated. Use the Activation Assistant (see the next page).

Name of carrier

Only the name of

Your device is preactivated. You are ready to connect to the network; see

carrier

“Connecting to the network” on page 7.