2.Installation
2.1Basic Configuration
Before installing the
Factory Default Settings:
Baud Rate: 9600 bps (both
Delimiter: {
Address: 00
2.2 Power Supply
For ease of use in industrial environments, ADAM modules are designed to accept industry standard +24 VDC unregulated power. Modules are certified for operation with any power sup- ply source between +10 and +30 VDC. Power
ripples must be limited to 5 V peak to peak, while voltage must in all cases remain between +10 and +30 VDC. All power supply specifications are referenced at the module connector.
Power cables should be selected according to the number of modules connected and the length of the power lines. When using a network with long cables, we advise the use of thicker wire to limit the line voltage drop. In addition to serious voltage drops, long voltage lines can also cause interference with communication wires.
We advise that the following standard colors (as indicated on the modules) be used for power lines:
+Vs ð (R) Red
GND ð (B) Black
6 |