Advantech ADAM-4550 user manual Example Command

Page 21

FF : ADAM-4550 mode configuration

Response !AA(cr) if the command is valid

?AA(cr) if an invalid command is entered

Example Command:

%0A1B40AA2103(cr)

Response: !0A(cr)

PP:RS-232/RS-485 data format. It is currently a fixed number.

The ADAM-4550 module with address 0Ah is configured to a new address 1Bh and the baud rate is set to 115.2 Kbps. RS-232 data format is fixed to N, 8, 1.

ADAM-4550 User's Manual

Image 21

Contents ADAM-4550 Contents FCC Warning FCC IdentificationFeatures IntroductionBuilt-in Intelligence Page Basic Configuration InstallationFactory Default Settings Power SupplySoftware Configuration RS-485 Communication WiringConfiguring ADAM-4550 Basic Connection Diagram Pin Assignment Uploading a New Version of Firmware Using the Diagnostics Functions Antenna Installation Using ADAM-4550 115.2 ADAM-4550-S RS-232ADAM-4550-01 Test Sample Syntax ADAM-4550 Command SetConfiguration Mode Commands Data Pass Mode Commands Set New Configuration Command DescriptionsExample Command Write Identification Read ConfigurationSet Delimiter Character Read IdentificationSet Data Gate Read Delimiter CharacterRemain at Open Gate/Write to Flash Response Read Data Gate Status DescriptionExample Read Firmware VersionUploading Read Module NameSend Data to Remote Data Pass mode Get Error Rate StatisticsDBi Omni-Directional Antenna Appendix a External Antenna OptionsDBi Grid Parabolic Reflector Directional Antenna Appendix B External Antenna Wiring Diagram