4.4 Read Identification
Description Requests to read identification data from the module at address AA.
Syntax $AA7(cr)
Response !AA(identification characters)(cr) if the command is valid
?AA(cr) if an invalid command is entered
Example Command: $0A7(cr)
Response: !0AADAM4550
Unit#1(cr)
4.5. Set Delimiter Character
Description Requests to assign a new delim- iter character to the module at address AA.
Syntax $AACD(cr)
D:delimiter character selected from ‘:’,‘[‘, ‘]’,‘^’, ‘{‘, ‘}’, ‘’, ‘~’
Response !AA(cr) if the command is valid
?AA(cr) if an invalid command is entered
Example Command: $0AC[(cr)
Response: !0A(cr)
23 |