4.2 Read Configuration
Description Requests to read the current baud rate and address from the module.
Syntax $AA2(cr)
AA:module address ( 2 hexa- decimal characters )
Response !AATTCCFFPP(cr) if the com- mand is valid (refer to “Set New Configuration” in Command Set)
?AA(cr) if an invalid command is entered
Example Command : $0A2(cr)
Response:
!0A40AA2103(cr)
4.3 Write Identification
Description Requests to assign identification data to the module at address
AA.The identification character lengths can range from 0 to 16 bytes including
Syntax $AA6(identification characters)(cr)
Response !AA(cr) if the command is valid
?AA(cr) if an invalid command is entered
Example Command: $0A6ADAM4550 Unit#1(cr)
Response: !0A(cr)
22 |