Elmo HV-8000SX Operation Procedures, Simple steps for presenting printed material

Page 20

6. OPERATION PROCEDURES

Simple steps for presenting printed material

(1) Turn ON the power switch.

Note: Before turning ON the power switch, connection to the monitor should have been completed.

Note: When the power switch is turned ON, the lighting unit lights up.

Note: If the power switch is turned ON immediately after being turned OFF, the Presenter may not operate. For restarting, turn OFF the Presenter and wait several seconds then turn ON.

(2)Place the object on the stage. Adjust the image size according to the object size using the zoom buttons ([TELE] / [WIDE]) on the front panel or the zoom buttons ([TELE] / [WIDE]) on the wireless remote control, while watching the image on the TV monitor.

(3)Press the auto focus button [AUTO FOCUS] on the front panel or the auto focus button [AF] on the wireless remote control.

Note: The auto focus function works up to a height of approx. 10cm (3.9 in) above the stage surface when the zoom button [TELE] is set to the maximum.

Front panel

Wireless remote control

TELE ZOOM WIDE

Front panel

Wireless remote control

INPUTAF

- 19 -

Image 20

Contents HV-8000SX Important Safeguards Page When the product exhibits a distinct change in performance Page Before YOU USE Contents OSD On-Screen Display Network FunctionsPart Names and Functions Front PanelLamp Buttons 17. Zoom Buttons ButtonOperation Panel Name Function ReferenceRS-232C Rear PanelDC12V Video-in Wireless Remote Control Button Name Function ReferenceWireless Remote Control PreparationMouse Menu Pointer Click Is displayed Is clearedSetting UP Connection to the composite video-in terminal Connection to the monitor and the projectorConnection to the analogue RGB-in terminal Analogue RGB signal Signal allocationConnection to the S video-in terminal Pin assignmentStoring the Presenter Simple steps for presenting printed material Operation ProceduresFront panel Wireless remote control Operation panel Front panel Wireless remote control Various Functions LightingInput selection Operation panel Wireless remote controlZoom Operation panel Output to the monitorTable of Video- and Audio-in / out Terminal Selections Table of Corresponding Signals MHz Horizontal VerticalElectronic enlargement Color / B&W selectionPause Posi / Nega conversionImage rotation Button White Balance on ContrastWhite Balance Iris Focus Near or Focus FAR on FocusAuto Focus About the preset and move operation Powered Manual FocusHow to move How to presetConnecting to the LCD monitor out terminal LCD monitor bracket socketPC link software Image Mate OSD On-Screen Display Main menuNEAR/FAR Mode initial setting Preparation for connection Preparation before setting upNetwork Functions Setting up of the network Ethernet cross cable accessoryConnection to the network Ethernet straight cableReference · Appendix Setting items of the network Initialization of the network settings Display of quasi-moving images Display of static imagesOperation of remote control Setting up FTP server functions Transferring image files OperationAppendix Setting items of the networkSetting items of the FTP client Response message Specifications of the FTP serverCorresponding command RS-232C Specifications Setting upCable connection DSUB-9P FemaleParameter Data Comments Table of the communication commandsWhen the image enlargement is on Data format specifications Transmission Command PC Visual Presenter Response data format Visual Presenter PCTransmission specifications ConnectionSymptom Possible cause / countermeasure Troubleshooting HintsReplacement of fluorescent lamp Specifications SpecificationsNetwork Specifications GeneralMain camera Sxga / XGASupplied accessories OptionsTrademark Acknowledgements LightingGermany Elmo Europe G.m.b.H Elmo Mfg. CorpCanada Elmo Canada Mfg. Corp