Elmo HV-8000SX instruction manual Operation of remote control

Operation of remote control

When the link [CONTROL] at the quasi-moving image page is clicked, the CONTROL page is displayed. At the CONTROL page, the lighting can be changed, the zoom can be adjusted, the iris can be adjusted, the focus can be adjusted, the color/B&W can be switched, the posi/nega can be switched, the aperture can be adjusted, the contrast can be adjusted and the color tone (RGB) can be adjusted, all through remote control. Click the button for intended operation. For the adjustments of the zoom, iris, focus and color tone, a preset amount changes each time the button is clicked.

FTP client function – Saving image files in the remote host by using the image transfer button [IMAGE TRANSFER]

When the image transfer button [IMAGE TRANSFER] on the operation panel is pressed, the image file can be saved in the host on the network set in [FTP Client Configuration]. To use this function, the FTP server of the host must be in operation at the saving destination.

Also to use this function, the FTP clients must be set beforehand.

This Presenter provides two procedures for setting the FTP clients as follows:

•Connecting the Presenter from the host on the network through the Web browser.

•Connecting the Presenter from the host on the network through telnet.

Here, the setup procedure using the Web browser is described.

For the setup procedure using telnet, ask your distributor or nearest branch or service office of ELMO.

Note: For some FTP servers, the image may be unable to be saved by using this function. For the information of the applicable FTP servers, consult your dealer or an authorized ELMO service center.

- 41 -