Elmo HV-8000SX instruction manual

Page 5

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated

SA 1965 "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons . This marking is located at the bottom of product.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

SA 1966 (servicing) instructions in the literature accompanying the product.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

THIS IS A CLASS A PRODUCT.

IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

USER-INSTALLER

CAUTION:

Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party responsible for compliance to Part 15 of the FCC rules.

- 4 -

Image 5
Contents HV-8000SX Important Safeguards Page When the product exhibits a distinct change in performance Page Before YOU USE Contents Network Functions OSD On-Screen DisplayFront Panel Part Names and FunctionsLamp Buttons 17. Zoom Buttons ButtonName Function Reference Operation PanelRS-232C Rear PanelDC12V Video-in Button Name Function Reference Wireless Remote ControlPreparation Wireless Remote ControlMenu Pointer Click Is displayed Is cleared MouseSetting UP Connection to the composite video-in terminal Connection to the monitor and the projectorConnection to the analogue RGB-in terminal Signal allocation Analogue RGB signalConnection to the S video-in terminal Pin assignmentStoring the Presenter Simple steps for presenting printed material Operation ProceduresFront panel Wireless remote control Operation panel Front panel Wireless remote control Lighting Various FunctionsInput selection Operation panel Wireless remote controlZoom Operation panel Output to the monitorTable of Video- and Audio-in / out Terminal Selections MHz Horizontal Vertical Table of Corresponding SignalsColor / B&W selection Electronic enlargementPause Posi / Nega conversionImage rotation Button White Balance on ContrastWhite Balance Iris Focus Near or Focus FAR on FocusAuto Focus Powered Manual Focus About the preset and move operationHow to move How to presetLCD monitor bracket socket Connecting to the LCD monitor out terminalPC link software Image Mate Main menu OSD On-Screen DisplayNEAR/FAR Mode initial setting Preparation for connection Preparation before setting upNetwork Functions Ethernet cross cable accessory Setting up of the networkConnection to the network Ethernet straight cableReference · Appendix Setting items of the network Initialization of the network settings Display of static images Display of quasi-moving imagesOperation of remote control Setting up Operation FTP server functions Transferring image filesAppendix Setting items of the networkSetting items of the FTP client Response message Specifications of the FTP serverCorresponding command Setting up RS-232C SpecificationsCable connection DSUB-9P FemaleParameter Data Comments Table of the communication commandsWhen the image enlargement is on Data format specifications Response data format Visual Presenter PC Transmission Command PC Visual PresenterConnection Transmission specificationsSymptom Possible cause / countermeasure Troubleshooting HintsReplacement of fluorescent lamp Specifications SpecificationsNetwork Specifications GeneralSxga / XGA Main cameraOptions Supplied accessoriesTrademark Acknowledgements LightingGermany Elmo Europe G.m.b.H Elmo Mfg. CorpCanada Elmo Canada Mfg. Corp