Elmo HV-8000SX RS-232C Specifications, Setting up, Cable connection, DSUB-9P Female

Page 47

10. RS-232C SPECIFICATIONS

The Presenter can be controlled by a PC connected to the Presenter through the RS- 232C terminal [RS-232C].

Setting up

(1) Connect the Presenter to a PC with an RS-232C connection cable.

Note: When using an RS-232C cable available in the market, make sure of the connection shown the next page.

Note: To protect the Presenter and the PC, be sure to turn OFF all the power switches of all equipment before connecting.

(2)Start the PC, and set the communication mode of the RS-232C to the communication mode of the Presenter.

Note: For the information how to set the communication mode of the RS-232C, refer to the instruction manual of the PC.

(3)Start the PC program to operate the Presenter.

(4)Control through the RS-232C will start.

Note: For communication control, be sure to take the above steps for setting.

Cable connection

			Visual Presenter side
					(DSUB-9P)
	DSUB-9P (Female)					CD	1
	5	4	3	2	1	RXD	2
	5	4	3	2	1	TXD	3
						TXD	3
						DTR	4
						SG	5
						DSR	6
	9	8	7		6	RTS	7
	9	8	7		6	CTS	8
						RI (CI)	9

PC side (DSUB-9P)

	1	CD	PC side :
			DSUB-9P (Female)
	2	RXD
			5	4	3	2	1
	3	TXD

4DTR

5SG

6DSR

7RTS

8	CTS	9 8 7 6
9	RI

- 46 -

Image 47

Contents HV-8000SX Important Safeguards Page When the product exhibits a distinct change in performance Page Before YOU USE Contents Network Functions OSD On-Screen DisplayButton Part Names and FunctionsFront Panel Lamp Buttons 17. Zoom ButtonsName Function Reference Operation PanelRS-232C Rear PanelDC12V Video-in Button Name Function Reference Wireless Remote ControlPreparation Wireless Remote ControlMenu Pointer Click Is displayed Is cleared MouseSetting UP Connection to the composite video-in terminal Connection to the monitor and the projectorConnection to the analogue RGB-in terminal Pin assignment Analogue RGB signalSignal allocation Connection to the S video-in terminalStoring the Presenter Simple steps for presenting printed material Operation ProceduresFront panel Wireless remote control Operation panel Front panel Wireless remote control Lighting Various FunctionsInput selection Operation panel Wireless remote controlZoom Operation panel Output to the monitorTable of Video- and Audio-in / out Terminal Selections MHz Horizontal Vertical Table of Corresponding SignalsColor / B&W selection Electronic enlargementPause Posi / Nega conversionImage rotation Button White Balance on ContrastWhite Balance Iris Focus Near or Focus FAR on FocusAuto Focus How to preset About the preset and move operationPowered Manual Focus How to moveLCD monitor bracket socket Connecting to the LCD monitor out terminalPC link software Image Mate Main menu OSD On-Screen DisplayNEAR/FAR Mode initial setting Preparation for connection Preparation before setting upNetwork Functions Ethernet straight cable Setting up of the networkEthernet cross cable accessory Connection to the networkReference · Appendix Setting items of the network Initialization of the network settings Display of static images Display of quasi-moving imagesOperation of remote control Setting up Operation FTP server functions Transferring image filesAppendix Setting items of the networkSetting items of the FTP client Response message Specifications of the FTP serverCorresponding command DSUB-9P Female RS-232C SpecificationsSetting up Cable connectionParameter Data Comments Table of the communication commandsWhen the image enlargement is on Data format specifications Response data format Visual Presenter PC Transmission Command PC Visual PresenterConnection Transmission specificationsSymptom Possible cause / countermeasure Troubleshooting HintsReplacement of fluorescent lamp General SpecificationsSpecifications Network SpecificationsSxga / XGA Main cameraLighting Supplied accessoriesOptions Trademark AcknowledgementsGermany Elmo Europe G.m.b.H Elmo Mfg. CorpCanada Elmo Canada Mfg. Corp