Elmo HV-8000SX Output to the monitor, Table of Video- and Audio-in / out Terminal Selections

Table of Video- and Audio-in / out Terminal Selections

Input

Main

Unit

RGB1

RGB2

Output signal Video-out Terminal Audio-out Terminal

RGBL R

Main camera video signal

Microphone	Monaural
Main camera video signal
External video signal 1	RGB1
External audio signal 1	Stereo 1 (L/R)
Microphone	Monaural
Main camera video signal
External video signal 2	RGB2
External audio signal 2	Stereo 2 (L/R)
Microphone	Monaural

Output to the monitor

Select the signal to be output to the	Operation panel
NTSC/PAL monitor. When the monitor
output button [RGB1] or [RGB2] on the
operation panel is pressed while [RGB1]
or [RGB2] is selected for the input
selection, the indicator lamp lights up,
and the image from the equipment
connected to the external input terminal
[RGB1] or [RGB2] is presented on the
NTSC/PAL monitor. When the [MAIN]
button of the monitor output on the
control panel is pressed, the indicator
lamp lights up, and the image from the
main camera is presented on the
NTSC/PAL monitor.

Note: The input signals to the external input terminal RGB1 and RGB2 can be output to the NTSC/PAL monitor if their frequencies are among the listed in the table at the next page.

- 23 -