Elmo HV-8000SX Network Functions, Preparation for connection, Preparation before setting up

Page 37

9. NETWORK FUNCTIONS

By connecting this Presenter to the network using Ethernet (10BASE-T/100BASE-TX), the following functions are made available from the host (e.g., PC) on the network:

•Web server functions – Displaying quasi-moving images, displaying static images and operating remote control through the Web browser.

•FTP client functions – Saving image files in the remote host by using the image transfer button [IMAGE TRANSFER].

•FTP server functions – Transferring image files.

•telnet server functions – Operating remote control and acquiring status data.

Note: It is not assured that this Presenter can be connected to all units on the network.

Note: The applicable Web browsers are Internet Explorer 4.0 and newer and Netscape 4.7 and newer. For any other browser, consult your dealer or an authorized ELMO service center.

Preparation for connection

Before connecting the Presenter to the network for use, the network must be set up (e.g., IP address).This Presenter provides two procedures for setting up the network as follows:

•Connecting the Presenter from the host on the network through the Web browser.

•Connecting the Presenter from the host on the network through telnet.

Here, the setup procedure using the Web browser is described.

For the setup procedure using telnet, consult your dealer or an authorized ELMO service center.

Preparation before setting up

Before starting the setup, specify the IP address and subnet mask to be set up in the Presenter. For the IP address and subnet mask to be specified, ask the administrator of the network to be used.

This Presenter has been factory set on the network as follows:

IP address

192.168.0.100

Subnet mask

255.255.255.0

If the network address of the network to be used is not 192.168.0.0 or if there is any other host with the IP address 192.168.0.100 is already in operation on the same network, this Presenter cannot be connected to the network for setup. In this case, a network with the IP address 192.168.0.0 must be configured with this Presenter and the host for setting up this Presenter. Prepare a host having the IP address 192.168.0.X (X: 1~254, excluding 100) and the subnet mask 255.255.255.0, and connect such host to the Presenter.

Reference Page

• Accessing the network

P.36, P.37, P38

- 36 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HV-8000SX Important Safeguards Page When the product exhibits a distinct change in performance Page Before YOU USE Contents Network Functions OSD On-Screen DisplayFront Panel Part Names and FunctionsLamp Buttons 17. Zoom Buttons ButtonName Function Reference Operation PanelDC12V Rear PanelRS-232C Video-in Button Name Function Reference Wireless Remote ControlPreparation Wireless Remote ControlMenu Pointer Click Is displayed Is cleared MouseSetting UP Connection to the analogue RGB-in terminal Connection to the monitor and the projectorConnection to the composite video-in terminal Signal allocation Analogue RGB signalConnection to the S video-in terminal Pin assignmentStoring the Presenter Front panel Wireless remote control Operation ProceduresSimple steps for presenting printed material Operation panel Front panel Wireless remote control Lighting Various FunctionsZoom Operation panel Wireless remote controlInput selection Table of Video- and Audio-in / out Terminal Selections Output to the monitorOperation panel MHz Horizontal Vertical Table of Corresponding SignalsColor / B&W selection Electronic enlargementImage rotation Posi / Nega conversionPause White Balance ContrastButton White Balance on Iris Auto Focus FocusFocus Near or Focus FAR on Powered Manual Focus About the preset and move operationHow to move How to presetLCD monitor bracket socket Connecting to the LCD monitor out terminalPC link software Image Mate Main menu OSD On-Screen DisplayNEAR/FAR Mode initial setting Network Functions Preparation before setting upPreparation for connection Ethernet cross cable accessory Setting up of the networkConnection to the network Ethernet straight cableReference · Appendix Setting items of the network Initialization of the network settings Display of static images Display of quasi-moving imagesOperation of remote control Setting up Operation FTP server functions Transferring image filesSetting items of the FTP client Setting items of the networkAppendix Corresponding command Specifications of the FTP serverResponse message Setting up RS-232C SpecificationsCable connection DSUB-9P FemaleWhen the image enlargement is on Table of the communication commandsParameter Data Comments Data format specifications Response data format Visual Presenter PC Transmission Command PC Visual PresenterConnection Transmission specificationsReplacement of fluorescent lamp Troubleshooting HintsSymptom Possible cause / countermeasure Specifications SpecificationsNetwork Specifications GeneralSxga / XGA Main cameraOptions Supplied accessoriesTrademark Acknowledgements LightingCanada Elmo Canada Mfg. Corp Elmo Mfg. CorpGermany Elmo Europe G.m.b.H
Top Page Image Contents