Elmo HV-8000SX instruction manual Auto Focus, Focus Near or Focus FAR on

Focus
Auto Focus	Front panel
Press the auto focus button [AUTO
FOCUS] on the front panel or the auto
focus button [AF] on the wireless remote
control, and the auto-focus will be
	Wireless remote control
activated.
While the auto-focus is in operation, the			INPUT	AF
indicator lamp on the front panel blinks
until the object is brought into focus.
The Presenter features a one-push auto	Front panel
focus function. Once focusing is
completed, the auto focus function is
released, and the focused position
maintains unchanged (FOCUSFREE).
To obtain sharper image, zoom in on the
object by pressing the zoom button	Wireless remote control
[TELE] on the front panel or wireless		TELE ZOOM		WIDE
remote control and press the auto-focus
botton.
However, the objects listed below may
not be brought into focus in the auto
focus mode. In these cases, use the
manual focus mode.

•Objects bearing little contrast

•Objects with fine repeated patterns, such as lateral stripes and cross stripes

•Objects glittering or reflecting strong light

•Objects with bright background, or excessive contrast

•Objects in a dark picture plane

•Objects located near and far away at the same time

•Objects in motion

If the focus button [NEAR] or [FAR] on the front panel or the focus button

[FOCUS NEAR] or [FOCUS FAR] on

the wireless remote control is pressed during the auto focus, the auto focus will be released.

Note: The auto focus function works up to a height of approx. 10cm (3.9 in) above the stage surface when the zoom button [TELE] is set to the maximum.

- 29 -

Operation panel

Wireless remote control

FOCUS NEAR FOCUS FAR

ZOOM WIDE