Packard Bell SL manual Optical Disk Drive, Removing screw securing Wlan adapter

Page 11

1010101010

10

Note: There are two antenna cables connected to the wireless LAN adapter. The black antenna cable is connected to MAIN (1) connector and the white antenna cable is connected to AUX (2) connector.

4. Remove the screw securing the wireless LAN; the adapter will eject upwards.

Fig. 13 Removing screw securing WLAN adapter.

5. Take out the wireless LAN adapter from the socket.

Optical Disk Drive

To remove the optical disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:

1. Remove the two screws securing the optical disk drive.

Fig. 14 Removing screws securing optical disk drive.

2.Use the emergency eject hole to open the optical disk drive.

3.Pull the tray and take out the optical disk drive from the drive bay.

Packard Bell EasyNote SL Disassembly Manual

Image 11
Contents EasyNote SL Table of Contents For More Information DisassemblyReassembly About this GuideAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Hard Disk Drive BatteryTake the drive out of its compartment as shown in Fig Location of hard disk drive bracket screws Memory 88888 Remove the two screws securing the memory compartment Location of antenna cable connectors Wireless LAN AdapterRemoving screw securing Wlan adapter Optical Disk DriveRemoving metal bracket TV Tuner OptionalRemoving TV tuner card Intel Turbo Memory OptionalKeyboard Cmos BatteryRemoving keyboard Top CoverRemove the four screws securing the top cover Touchpad LCD AssemblyLocation of hinge screws BluetoothSpeakers Location of bluetooth moduleSata Adapter USB BoardCPU Fan and Heat Sink Power ConnectorLocation of CPU fan and heat sink Main BoardCPU Inverter Board Video BoardLCD Bezel LCD Panel WebcamLCD Cable Wireless LAN AntennaEasyNote SL Disassembly Manual