1919191919 | 19 |
USB Board
To remove the USB board, first remove the top cover (see Top Cover on page 14), and then perform the following steps:
1. Disconnect the black cable from the header on the USB board.
Fig. 31 Location of USB board cable and screw.
Note: Optionally, you can disconnect the other end of the cable from the main board.
2.Remove the screw securing the USB board (see Fig. 31).
3.Lift out the USB board.
SATA Adapter
To remove the SATA adapter, first remove the top cover (see Top Cover on page 14), and then perform the following steps:
1. Remove the two screws securing the SATA adapter.
Fig. 32 Location of SATA adapter screws.
2. Lift out the SATA adapter.
Packard Bell EasyNote SL Disassembly Manual