66666 | 6 |
6. Remove the two screws on the metal bracket to separate it from the hard disk drive.
Fig. 5 Location of hard disk drive bracket screws.
Hard Disk Drive 2
To remove the right hard disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:
1. Remove the screw securing the right hard disk drive compartment cover.
Fig. 6 Removing hard disk drive compartment cover.
2.Lift the cover upwards from the right. There are two tabs holding the cover in place on the left. Raise the cover until you can remove it from the casing (see Fig. 6).
Packard Bell EasyNote SL Disassembly Manual