1111111111 | 11 |
4. Remove the two screws securing the metal bracket and remove it from the drive.
Fig. 15 Removing metal bracket.
TV Tuner (Optional)
To remove the optional TV tuner, first remove the battery (see Battery on page 4), and then perform the following steps:
1.Remove the two screws securing the TV tuner compartment cover (see Fig. 9).
2.Lift the cover upwards from the left. There are three tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 9).
3.Carefully disconnect the TV antenna cable.
Fig. 16 Location of antenna cable connector and screw.
4. Remove the screw securing the TV tuner (see Fig. 16); the card will eject upwards.
Packard Bell EasyNote SL Disassembly Manual