2020202020 | 20 |
Power Connector
To remove the power connector, first remove the top cover (see Top Cover on page 14), and then perform the following steps:
1. Carefully disconnect the power cable from the header on the main board.
Fig. 33 Disconnecting power cable.
2. Remove the screw securing the short black cable.
Fig. 34 Location of power connector screws.
3.Remove the screw securing the power connector to the casing (see Fig. 34).
4.Remove the power connector and the cable.
CPU Fan and Heat Sink
To remove the CPU fan and heat sink, first remove the top cover (see Top Cover on page 14) and then perform the following steps:
Packard Bell EasyNote SL Disassembly Manual