Packard Bell SL manual Cpu

Page 23

2222222222

22

2. Remove the eight screws securing the main board.

Fig. 37 Location of main board screws.

3. Lift the main board out of the bottom casing.

CPU

To remove the CPU, first remove the main board (see Main Board on page 21), and then perform the following steps:

1.Turn the screw in the CPU socket counter-clockwise into the unlock position to release the CPU.

Fig. 38 Location of screw securing CPU.

2. Carefully take out the CPU from the socket.

Packard Bell EasyNote SL Disassembly Manual

Image 23
Contents EasyNote SL Table of Contents For More Information DisassemblyReassembly About this GuideAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Hard Disk Drive BatteryTake the drive out of its compartment as shown in Fig Location of hard disk drive bracket screws Memory 88888 Remove the two screws securing the memory compartment Location of antenna cable connectors Wireless LAN AdapterRemoving screw securing Wlan adapter Optical Disk DriveRemoving metal bracket TV Tuner OptionalRemoving TV tuner card Intel Turbo Memory OptionalKeyboard Cmos BatteryRemoving keyboard Top CoverRemove the four screws securing the top cover Touchpad LCD AssemblyLocation of hinge screws BluetoothSpeakers Location of bluetooth moduleSata Adapter USB BoardCPU Fan and Heat Sink Power ConnectorLocation of CPU fan and heat sink Main BoardCPU Inverter Board Video BoardLCD Bezel LCD Panel WebcamLCD Cable Wireless LAN AntennaEasyNote SL Disassembly Manual