2424242424 | 24 |
2.Remove the screw securing the inverter board.
3.Extract the inverter board.
Webcam
To remove the webcam, first remove the LCD bezel (see LCD Bezel on page 23), and then do the following:
1. Disconnect the cable from the header on the webcam.
Fig. 41 Location of webcam connector.
2.Remove the two screws securing the webcam module (see Fig. 41).
3.Extract the webcam.
LCD Panel
To disassembly the LCD panel, first remove the LCD assembly (see LCD Assembly on page 16), remove the LCD bezel (see LCD Bezel on page 23), and then perform the following steps:
1. Remove the four screws securing the LCD.
Fig. 42 Location of bracket screws.
2. Separate the LCD panel with the brackets from the back cover.
Packard Bell EasyNote SL Disassembly Manual