Packard Bell SL manual Intel Turbo Memory Optional, Removing TV tuner card

Page 13

1212121212

12

5. Take out the TV tuner card from the socket.

Fig. 17 Removing TV tuner card.

Intel Turbo Memory (Optional)

To remove the optional Intel Turbo Memory module, first remove the battery (see Battery on page 4), and then perform the following steps:

1.Remove the two screws securing the Intel Turbo Memory compartment cover (see Fig. 9).

2.Lift the cover upwards from the left. There are three tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 9).

3.Remove the screw securing the Intel Turbo Memory module; the card will eject upwards.

Fig. 18 Location of screw securing Intel Turbo Memory module.

Packard Bell EasyNote SL Disassembly Manual

Image 13
Contents EasyNote SL Table of Contents Reassembly DisassemblyAbout this Guide For More InformationHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Hard Disk Drive BatteryTake the drive out of its compartment as shown in Fig Location of hard disk drive bracket screws Memory 88888 Remove the two screws securing the memory compartment Location of antenna cable connectors Wireless LAN AdapterRemoving screw securing Wlan adapter Optical Disk DriveRemoving metal bracket TV Tuner OptionalRemoving TV tuner card Intel Turbo Memory OptionalKeyboard Cmos BatteryRemoving keyboard Top CoverRemove the four screws securing the top cover Touchpad LCD AssemblyLocation of hinge screws BluetoothSpeakers Location of bluetooth moduleSata Adapter USB BoardCPU Fan and Heat Sink Power ConnectorLocation of CPU fan and heat sink Main BoardCPU LCD Bezel Video BoardInverter Board LCD Panel WebcamLCD Cable Wireless LAN AntennaEasyNote SL Disassembly Manual