Packard Bell SL manual Cmos Battery, Keyboard

Page 14

1313131313

13

4. Take out the Intel Turbo Memory module from the socket.

Fig. 19 Removing Intel Turbo Memory module.

CMOS Battery

To remove the CMOS battery, first remove the battery (see Battery on page 4), remove either the TV tuner card (see TV Tuner (Optional) on page 11) or the Intel Turbo Memory module (see Intel Turbo Memory (Optional) on page 12), and then perform the following steps:

1. Disconnect the white CMOS battery header from the main board.

Fig. 20 Disconnecting CMOS battery cable.

2. Take out the CMOS battery.

Keyboard

To remove the keyboard, first remove the battery (see Battery on page 4) and then perform the following steps:

Packard Bell EasyNote SL Disassembly Manual

Image 14
Contents EasyNote SL Table of Contents About this Guide DisassemblyReassembly For More InformationAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Battery Hard Disk DriveTake the drive out of its compartment as shown in Fig Location of hard disk drive bracket screws Memory 88888 Remove the two screws securing the memory compartment Wireless LAN Adapter Location of antenna cable connectorsOptical Disk Drive Removing screw securing Wlan adapterTV Tuner Optional Removing metal bracketIntel Turbo Memory Optional Removing TV tuner cardCmos Battery KeyboardTop Cover Removing keyboardRemove the four screws securing the top cover LCD Assembly TouchpadBluetooth Location of hinge screwsLocation of bluetooth module SpeakersUSB Board Sata AdapterPower Connector CPU Fan and Heat SinkMain Board Location of CPU fan and heat sinkCPU Inverter Board Video BoardLCD Bezel Webcam LCD PanelWireless LAN Antenna LCD CableEasyNote SL Disassembly Manual