Chapter 6: Diagnostics Specification 6-35
Using the NCR 5992 stylus, touch the displayed cross and hold it with the stylus until you hear a beep. The cross will then move to the next position, (the bottom left corner of the screen). Continue until all four corners of the screen have been touched with the stylus.
✎Note: Avoid touching the glass with your finger or hand while performing the stylus calibration.
If the ‘Both’ option is selected, the screen will then start over with the message to “Touch the cross with the finger”. Use your finger and touch each corner of the screen on the cross as you did with the stylus.
✎Note: Do not hold the stylus while performing the finger calibration.
When completed, the screen clears automatically and returns the DIAGNOSTICS menu. Pressing the Cancel key exits the session and starts the NCR 5992 application.