Chapter 6: Diagnostics Specification 6-19
Pressing the Cancel key during this test returns the AUX1B screen. Pressing Cancel again returns the DIAGNOSTICS AUX1B RS232 TEST menu.
Data Bit Selection
Select Data Bits from the AUX1B screen.
Data Bits 8
The default baud rate of “8” displays. The keypad Yes and No keys are used to scroll through the available options. The available data bit options are:
•7
•8
•9
When the desired option displays, press the Enter key to accept that parameter.
Pressing the Cancel key during this test returns the AUX1B screen. Pressing Cancel again returns the DIAGNOSTICS AUX1B RS232 TEST menu.
SRAM Test
The SRAM diagnostics test the read and write capabilities on the RAM chip. Select SRAM TEST from the DIAGNOSTICS menu. The test is conducted and results are displayed. For example:
032k Passed
Press any key . . .
Pressing any key exits this screen and returns the DIAGNOSTICS menu. Pressing the Cancel key exits the session and starts the 5992 application.