FieldServer FS-8700-80 Provided by Supplier of 3rd Party Equipment, Hardware Connections

Page 5

McQuay Micro Tech Open Protocol Driver Manual

Page 5 of 35

2.Driver Scope of Supply

2.1.Supplied by FieldServer Technologies for this driver

FieldServer Technologies PART #

DESCRIPTION

FS-8917-16

RJ45 to terminal connector cable.

2.2.Provided by Supplier of 3rd Party Equipment

PART #

DESCRIPTION

McQuay Motor Mount Connector for Port A connection

3.Hardware Connections

The FieldServer is connected to the McQuay device as shown below.

Configure the McQuay device according to manufacturer’s instructions.

SERIES 200 CONTROLLER

RJ45-04

BLUE/WHITE

RJ45-08

ORANGE/WHITE

RJ45-01

BROWN

FS-8917-16

Connect to one of the RS-232

Ports on the FieldServer

8

1

FieldServer

P1

 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldServer.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldServer.com

Image 5
Contents Driver Manual FS-8700-80 McQuay Micro Tech Open Protocol Table of Contents Page McQuay Micro Tech Open Protocol Driver Manual FieldServer Provided by Supplier of 3rd Party EquipmentHardware Connections Data Arrays Page Page Timing Parameters Driver Related Map Descriptor ParametersDACHILLER1 Damodes Map Descriptor Example 3 WritePage Page Driver Specific Map Descriptor Parameters DACHILLER1 Passive Chiller1 1024 256 Chiller1emulation2 Page Equipment Type 200CFC 200 Series Centrifugal Chiller McQuay Micro Tech Open Protocol Driver Manual Equipment Type 050RPC Reciprocating Chiller McQuay Micro Tech Open Protocol Driver Manual Page McQuay Micro Tech Open Protocol Driver Manual Equipment Type 001ASC Reciprocating Chiller Equipment Type Self-Contained Units SCUs McQuay Micro Tech Open Protocol Driver Manual Appendix A.4. Direct Addressing Appendix A.3 McQuay Equipment Types recognized by the driverPage DACHILLER1 DACHILLER1 NAK Damcqstats UINT32 Page McQuay Micro Tech Open Protocol Driver Manual Appendix C.2. Negative Acknowledgement NAK Appendix C.3. Node ID problems