Page 19 of 62 | |
|
|
6.2.5 Map Descriptor Example 1 - Explicit Configuration using Network Management Polls
The Map Descriptor pollTemp_p shows the use of SNVT_Units for Scaling when polling temperature
The Map Descriptor pollSwitch shows the use of SNVT_Option for Selective data scanning. This only brings in the “State” portion of SNVT_Switch
Map_Descriptors |
|
|
|
|
|
|
|
|
|
|
Map_Descriptor_Name | ,Data_Array_Name | ,Data_Array_Offset | ,Lon_Function | ,Function | ,Node_Name | ,SNVT_Index | ,SNVT_Type | ,SNVT_Units | ,SNVT_Option | ,Scan_Interval |
pollTemp_p | ,DA_Explicit | ,1 | ,NMFETCHC | ,Rdbc | ,Remote_Node | ,0 | ,SNVT_temp_p | ,Deg_F | ,- | ,1.0s |
pollSwitch | ,DA_Explicit | ,2 | ,NMFETCHC | ,Rdbc | ,Remote_Node | ,1 | ,SNVT_switch | ,- | ,State | ,1.0s |
|
|
|
|
|
|
|
|
|
|
|
This field |
|
|
determines the |
|
|
Map | Explicitly Addressed Client Map Descriptors use | For |
Descriptor’s | this field to point to their relevant Server Map | Client Map |
function. See | Descriptors. | Descriptors the |
Section 6.1.2 |
| Scan_Interval |
for more |
| determines the |
information. |
| update rate. |
6.2.6 Map Descriptor Example 2 – Polling UNVT’s
Map_Descriptors |
|
|
|
|
|
|
|
|
|
Map_Descriptor_Name | ,Data_Array_Name | ,Data_Array_Offset | ,Lon_Function | ,Function | ,Node_Name | ,SNVT_Index | ,SNVT_Type | ,UNVT_Byte_Length | ,Scan_Interval |
pollUNVT | ,DA_Explicit | ,101 | ,NMFETCHC | ,Rdbc | ,Remote_Node | ,2 | ,UNVT | ,31 | ,1.0s |
|
|
|
|
|
|
|
|
|
|
UNVT Byte length must be specified for correct operation.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com