FieldServer FS-8700-21 Appendix B. Vendor Information, Appendix B.1. Echelon LonMaker

Page 30

FS-8700-21 LonWorks Manual

Page 30 of 62

 

 

Appendix B. Vendor Information

Appendix B.1. Echelon LonMaker

Appendix B.1.1. Using LonMaker to commission the FieldServer

Ensure that the correct firmware and latest configuration is loaded on the FieldServer (Each change in the FieldServer requires re-commissioning of the FieldServer in LonMaker)

Ensure that the FieldServer and the LonMaker machine are on the same network.

Open the existing Network in LonMaker, or create a new Network

Click on “Create New Network” and follow the network wizard, making the following selections:

Network Interface: Choose Network Attached

Management Mode: Choose Onnet unless you are working offline

Register Plug-ins required. None

Once Visio is open with the Network showing, drag a new device onto the drawing from the toolbox.

Follow the Device Network, making the following selections

Enter Device Name: Choose commission device

Specify Device Template: Choose upload from device

Specify Device Channel: Choose Auto Detect

Specify Device Properties: Leave as is (Ping is optional)

Identify Device: Choose service pin

Device Application Image: Leave unchecked

Initial State: Leave as is

Press the service pin on the FieldServer when asked to do so, and the FieldServer will be commissioned.

Drag a new function block onto the drawing from the toolbox. Give the function block a name and ensure that it is allocated to the FieldServer device.

Once the function block is on the drawing, drag input and output variables onto the function block. LonMaker will display the variables available for binding. Click on the variables you require (or use the select all option), and they will be commissioned onto the function block.

Connect these variables to other devices by dragging connections from the toolbox and connecting the variables.

Appendix B.1.2. Removing Previous FieldServer Device Templates in LonMaker.

If you have previously used LonMaker to commission a FieldServer or ProtoCessor onto a LonWorks network, LonMaker saves the properties of that device as a device template. It is important to remove all previous device templates from LonMaker when moving onto your next FieldServer product as some parameters might transfer to your new device.

To remove the device templates, open your LonMaker workspace as you would normally do. Then choose the LonMaker toolbar and choose the Device Templates option. This will bring up a list of all device templates. Highlight and then remove all device templates that do not contain “Echelon” or “LNS”. This will ensure a fresh commission of your FieldServer product.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Driver Manual FS-8700-21 LonWorks Table of Contents Appendix D. SNVTType NV Updates/Polls Network ManagementLonWorks Program ID Calculation Spid Explicit/Implicit Configuration PropertiesClients/Servers XIF FilesSupplied by FieldServer Technologies for this driver Provided by the Supplier of 3 rd Party EquipmentAdditional files required for the Driver Service Pin Hardware ConnectionsLon LED’s Port Address SwitchNeuron ID LonWorks Adapter Card FS-X40 onlyImplicit Lon functions Special considerationsMap Descriptor Names Network Variable Names SNVTIndexNetwork Management Capability Client vs Server MappingClient Side Mapping Connection Parameters Node Parameters FieldServer Related Map Descriptor ParametersDriver Related Map Descriptor Parameters Timing ParametersClient Side Map Descriptor Example Explicit Configurations Lon functionsDomain Table Setup Network Management Client Side Configuration Connections NodesFS-8700-21 LonWorks ManualPage 18 Map Descriptor Example 2 Polling UNVT’s Using Neuron ID to Address Devices Client Drivers only Server Side Configuration Connections FS-8700-21 LonWorks ManualPage 22 Map Descriptor Example Appendix A.3. Throttling Mode Appendix A.1. Using UNVT’sAppendix A.2. Using NVMin, NVMax etc Appendix A.4. XIF GenerationAppendix A.5. Configuration Properties Appendix A.6. LonMark Object CreationCfgnvui Appendix A.7. Node Status Operation Appendix A.8. Working with Binary DataAppendix A.9. Filtering Snvt Variables FS-8700-21 LonWorks Manual Appendix B. Vendor Information Appendix B.1. Echelon LonMakerAppendix B.2. Neuron Systems Appendix B.3. Honeywell CareAppendix B.4. Tridium Jace Appendix B.5. Trane Rover Appendix C.2. Error Messages Appendix C.1. Debugging a LonWorks connection Hints and tipsAppendix C.3. Exposing Operation Statistics UINT32Appendix C.4. Illegal Characters in Network Variable Names Appendix C.5. CirconSI LimitationsAppendix C.7. Combining Explicit and Implicit Appendix D. SNVTType Location array element Kilo-British Thermal 65,535 Units Mega-British Thermal Sender Range Lower ID Data Length Suggested Data Array Formats KiloJoules per Kilogram FS-8700-21 LonWorks Manual Data Length Suggested Data Array Formats Float Measurement Units Values Range Invalid Value 163.840 Type Raw SNVTmassf FS-8700-21 LonWorks Manual Data Item Measurement Units Values Range Invalid Value Parts per Million ppm FS-8700-21 LonWorks Manual Measurement Units Values Range Invalid Value SNVTpumpsensor SNVTpumpsetmn Measurement Units Values Range Invalid Value SNVTpumpsetmn SNVTpwrfactf RPM Millimeters per Second Difference Type Measurement Units Values Range Invalid Value SNVTtempsetpt FS-8700-21 LonWorks Manual Kiloliters kl Measurement Units Values Range Invalid Value SNVTzerospan
Top Page Image Contents