FieldServer FS-8700-21 instruction manual Appendix C.3. Exposing Operation Statistics, UINT32

Page 34

FS-8700-21 LonWorks Manual

Page 34 of 62

 

 

Appendix C.3. Exposing Operation Statistics.

If this driver is appropriately configured, it can expose operation statistics in a Data Array which can be monitored by a remote device to check that the driver is performing without error.

The lines from the example below can be cut and pasted into a configuration file to expose these stats.

Data_Arrays,

 

 

Data_Array_Name

,Data_Format

,Data_Array_Length

Lonworks-stats

,UINT32

,1000

Data Array

Description

Offset

1Increments each time Neuron ID is read. Used for scripting

2Overwritten each time Neuron ID is read. Contains 1st byte of Neuron ID

3Overwritten each time Neuron ID is read. Contains 2nd byte of Neuron ID

4Overwritten each time Neuron ID is read. Contains 3rd byte of Neuron ID

5Overwritten each time Neuron ID is read. Contains 4th byte of Neuron ID

6Overwritten each time Neuron ID is read. Contains 5th byte of Neuron ID

7Overwritten each time Neuron ID is read. Contains 6th byte of Neuron ID

8Not Used

9Not Used

10

11

12

13

14

15

16

17

18

19

20

21

Overwritten each time Neuron ID is read. Contains 1st nibble of 1st byte of Neuron ID as an ASCII char. e.g. if 1st byte=0x12 then the value stored here is 0x32 - the ASCII char for the digit 2

Overwritten each time Neuron ID is read. Contains 2nd nibble of 1st byte of Neuron ID as an ASCII char. e.g. if 1st byte=0x12 then the value stored here is 0x31 - the ASCII char for the digit 1

Overwritten each time Neuron ID is read. Contains 1st nibble of 2nd byte of Neuron ID as an ASCII char

Overwritten each time Neuron ID is read. Contains 2nd nibble of 2nd byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 1st nibble of 3rd byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 2nd nibble of 3rd byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 1st nibble of 4th byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 2nd nibble of 4th byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 1st nibble of 5th byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 2nd nibble of 5th byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 1st nibble of 6th byte of Neuron ID as an ASCII char.

Overwritten each time Neuron ID is read. Contains 2nd nibble of 6th byte of Neuron ID as an ASCII char.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Driver Manual FS-8700-21 LonWorks Table of Contents Appendix D. SNVTType Network Management NV Updates/PollsLonWorks Program ID Calculation Spid Explicit/Implicit Configuration PropertiesClients/Servers XIF FilesProvided by the Supplier of 3 rd Party Equipment Supplied by FieldServer Technologies for this driverAdditional files required for the Driver Service Pin Hardware ConnectionsLon LED’s Port Address SwitchNeuron ID LonWorks Adapter Card FS-X40 onlyImplicit Lon functions Special considerationsMap Descriptor Names Network Variable Names SNVTIndexClient vs Server Mapping Network Management CapabilityClient Side Mapping Connection Parameters Node Parameters FieldServer Related Map Descriptor ParametersDriver Related Map Descriptor Parameters Timing ParametersClient Side Map Descriptor Example Explicit Configurations Lon functionsDomain Table Setup Network Management Client Side Configuration Connections NodesFS-8700-21 LonWorks ManualPage 18 Map Descriptor Example 2 Polling UNVT’s Using Neuron ID to Address Devices Client Drivers only Server Side Configuration Connections FS-8700-21 LonWorks ManualPage 22 Map Descriptor Example Appendix A.3. Throttling Mode Appendix A.1. Using UNVT’sAppendix A.2. Using NVMin, NVMax etc Appendix A.4. XIF GenerationAppendix A.5. Configuration Properties Appendix A.6. LonMark Object CreationCfgnvui Appendix A.7. Node Status Operation Appendix A.8. Working with Binary DataAppendix A.9. Filtering Snvt Variables FS-8700-21 LonWorks Manual Appendix B. Vendor Information Appendix B.1. Echelon LonMakerAppendix B.3. Honeywell Care Appendix B.2. Neuron SystemsAppendix B.4. Tridium Jace Appendix B.5. Trane Rover Appendix C.2. Error Messages Appendix C.1. Debugging a LonWorks connection Hints and tipsAppendix C.3. Exposing Operation Statistics UINT32Appendix C.5. CirconSI Limitations Appendix C.4. Illegal Characters in Network Variable NamesAppendix C.7. Combining Explicit and Implicit Appendix D. SNVTType Location array element Kilo-British Thermal 65,535 Units Mega-British Thermal Sender Range Lower ID Data Length Suggested Data Array Formats KiloJoules per Kilogram FS-8700-21 LonWorks Manual Data Length Suggested Data Array Formats Float Measurement Units Values Range Invalid Value 163.840 Type Raw SNVTmassf FS-8700-21 LonWorks Manual Data Item Measurement Units Values Range Invalid Value Parts per Million ppm FS-8700-21 LonWorks Manual Measurement Units Values Range Invalid Value SNVTpumpsensor SNVTpumpsetmn Measurement Units Values Range Invalid Value SNVTpumpsetmn SNVTpwrfactf RPM Millimeters per Second Difference Type Measurement Units Values Range Invalid Value SNVTtempsetpt FS-8700-21 LonWorks Manual Kiloliters kl Measurement Units Values Range Invalid Value SNVTzerospan
Top Page Image Contents