FieldServer FS-8700-21 instruction manual Using Neuron ID to Address Devices Client Drivers only

Page 20

FS-8700-21 LonWorks Manual	Page 20 of 62

6.2.7 Using Neuron ID to Address Devices (Client Drivers only)

It is possible to poll remote LonWorks devices using their Neuron ID's instead of the traditional Network Manager method. The Neuron ID is the 12 Digit Hex identifier of the associated LonWorks Device. An example configuration follows.

Note that Neuron ID addressing is considered explicit addressing so the station address, domain ID and subnet ID must be set as described in Section 6.1.4

Bridge

System_Station_Address ,Title

110	,":D01:S01:Neuron ID Example:"

On the Client side Nodes add a new field as shown below:

Nodes
Node_Name	,Node_ID	,Protocol	,Neuron_ID
Lon_Srv_11	,11	,Lonworks	,F912AB440100
Create a Map Descriptor as Follows:

Map_Descriptors
Map_Descriptor_Name		,Data_Array_Name		,Data_Array_Offset		,Lon_Function	,Function	,Node_Name	,SNVT_Index	,SNVT_Type	,Scan_Interval
1nviAmp1		,DA_001		,0		,NMFETCHC	,RDBC	,Lon_Srv_11	,000	,SNVT_amp	,0s

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com

Image 20

Contents Driver Manual FS-8700-21 LonWorks Table of Contents Appendix D. SNVTType LonWorks Program ID Calculation Spid NV Updates/PollsNetwork Management Configuration Properties Clients/ServersExplicit/Implicit XIF FilesAdditional files required for the Driver Supplied by FieldServer Technologies for this driverProvided by the Supplier of 3 rd Party Equipment Service Pin Hardware ConnectionsPort Address Switch Neuron IDLon LED’s LonWorks Adapter Card FS-X40 onlySpecial considerations Map Descriptor Names Network Variable NamesImplicit Lon functions SNVTIndexClient Side Mapping Connection Parameters Network Management CapabilityClient vs Server Mapping Node Parameters FieldServer Related Map Descriptor ParametersDriver Related Map Descriptor Parameters Timing ParametersClient Side Map Descriptor Example Explicit Configurations Lon functionsDomain Table Setup Network Management Client Side Configuration Connections NodesFS-8700-21 LonWorks ManualPage 18 Map Descriptor Example 2 Polling UNVT’s Using Neuron ID to Address Devices Client Drivers only Server Side Configuration Connections FS-8700-21 LonWorks ManualPage 22 Map Descriptor Example Appendix A.1. Using UNVT’s Appendix A.2. Using NVMin, NVMax etcAppendix A.3. Throttling Mode Appendix A.4. XIF GenerationAppendix A.5. Configuration Properties Appendix A.6. LonMark Object CreationCfgnvui Appendix A.7. Node Status Operation Appendix A.8. Working with Binary DataAppendix A.9. Filtering Snvt Variables FS-8700-21 LonWorks Manual Appendix B. Vendor Information Appendix B.1. Echelon LonMakerAppendix B.4. Tridium Jace Appendix B.2. Neuron SystemsAppendix B.3. Honeywell Care Appendix B.5. Trane Rover Appendix C.2. Error Messages Appendix C.1. Debugging a LonWorks connection Hints and tipsAppendix C.3. Exposing Operation Statistics UINT32Appendix C.7. Combining Explicit and Implicit Appendix C.4. Illegal Characters in Network Variable NamesAppendix C.5. CirconSI Limitations Appendix D. SNVTType Location array element Kilo-British Thermal 65,535 Units Mega-British Thermal Sender Range Lower ID Data Length Suggested Data Array Formats KiloJoules per Kilogram FS-8700-21 LonWorks Manual Data Length Suggested Data Array Formats Float Measurement Units Values Range Invalid Value 163.840 Type Raw SNVTmassf FS-8700-21 LonWorks Manual Data Item Measurement Units Values Range Invalid Value Parts per Million ppm FS-8700-21 LonWorks Manual Measurement Units Values Range Invalid Value SNVTpumpsensor SNVTpumpsetmn Measurement Units Values Range Invalid Value SNVTpumpsetmn SNVTpwrfactf RPM Millimeters per Second Difference Type Measurement Units Values Range Invalid Value SNVTtempsetpt FS-8700-21 LonWorks Manual Kiloliters kl Measurement Units Values Range Invalid Value SNVTzerospan