Setup: Ethernet Setup | Page 17 |
Step 2: Test Internet Access
The Diva 2430’s default settings may already grant you Internet access. Try accessing an external web site using your browser, such as Eicon Networks’s site at:
http://www.eicon.com
•If successful, you do not need to change any settings.
•If you receive a ‘page not found’ or similar error, reboot your computer and try again. Your computer may not have acquired an IP address from your provider’s DHCP server the first time you installed the device; rebooting will force a new request.
•Internet access from some providers may require that you install PPP over Ethernet (PPPoE) software (not included with the Diva 2430). Contact your provider for more information.
•If you still cannot access the Internet, you will need to inspect the Diva 2430’s configuration settings. This procedure is described in Configuring Settings via the Web Interface on page 22. As most settings depend on the provisioning of your ADSL line, you should contact your ADSL provider to determine what the settings should be.