Eicon Networks Diva 2430 manual Regulatory Information for the European Union, Safety Status TNV-3

Page 66

Specifications and Regulatory Information: Regulatory Information

Page 66

Regulatory Information for the European Union

This equipment displays the Mark to show that it has been tested and found to be in full compliance with the requirements of the Radio & Telecommunications Terminal Equipment, EMC and Low Voltage Directives (1999/5/EC, 89/336/EEC and 72/23/EEC).

Safety Status: TNV-3

No voltages within this equipment exceed SELV voltages. The DSL port has TNV-3

Safety Status and all other interconnection points and ports are SELV.

This equipment draws power from an external power supply which has been separately approved. It does not draw power from the USB port of your computer.

Power Consumption

The user must ensure that the total power drawn by the host computer and all peripherals drawing power from it, including internally installed cards, does not exceed the capability of the host power supply unit. Maximum power consumption of the unit is stated in the section Specifications on page 59.

Image 66
Contents Diva 2430 Adsl Modem Fourth Edition March 206-362-04 Contents Introduction This SectionHardware Features Setup and Configuration FeaturesAdsl and Network Features Introducing the Diva 2430 Adsl ModemPackage Contents Setup Hardware Requirements Connecting to Both PortsOverview Software RequirementsConnecting Microfilters Connecting the MicrofiltersAbout Microfilters USB Setup Windows 2000, or Windows MeProcedure Connect the CablesInstall USB Drivers Setup USB Setup Test Internet Access Ethernet Setup Adsl Test Internet Access Optional Install the Diva Assistant Setup Optional Install the Diva Assistant LAN Setup Setup LAN Setup Configuring Settings via the Web Interface Logging into the Web-based Configuration InterfaceUsing the Configuration Menus ATM Settings Adsl Settings TCP/IP Setup Windows 95/98 Windows NT Windows Macintosh Mac OS 8 or later Troubleshooting Can’t access the InternetCan’t access the web-based configuration interface Power light is blinking red Using your Diva About the Diva Assistant Launching the Diva AssistantSystem Tray Icon General TabDiagnostic Log Tab Performance TabTools Tab Indicator Lights Reset Settings to Factory Defaults Resetting the DeviceNormal Reset Boot Monitor ModeWeb-based Configuration Interface Web-based Configuration Interface Overview Starting the Web-based Configuration Interface ‘Save’, ‘Reset Form’, and ‘Cancel’ Buttons ‘Reset’ and ‘Logout’ buttons on the main menuGetting Help Saving and restoring configuration files Upgrading Firmware Backing up Configuration FilesOpening to the Firmware Maintenance Retrieving Firmware from the Eicon Networks Web SiteUploading New Firmware Resetting to Factory Defaults Advanced Topics Security Automatic Log Out System password Setting a PasswordErasing the system password Disable Inbound Server Requests Enabling this OptionIP Traffic Only Setting up a VPN with Windows 95 or Windows Virtual Private NetworkingBefore you Begin Setting up a VPN with Windows Advanced Topics Virtual Private Networking Advanced Topics Virtual Private Networking Dialing the VPN Specifications and Regulatory Information Specifications General SpecificationsSoftware and Firmware Specifications UBR CBR Regulatory Information Regulatory Information for the United States Declaration of Conformity FCC Part 68 Notice Safety Notice Regulatory Information for Canada Safety Status TNV-3 Power ConsumptionRegulatory Information for the European Union Index Index