Eicon Networks Diva 2430 manual Resetting to Factory Defaults, Procedure

Page 46

Web-based Configuration Interface: Resetting to Factory Defaults

Page 46

Resetting to Factory Defaults

Resetting the Diva 2430 to factory defaults will erase all your configuration settings, including the system password. You may want to consider backing up your current configuration, as explained in Saving and restoring configuration files on page 43, before you reset to factory defaults.

Note: You can also reset to factory defaults using the Reset button on the device itself. See

Resetting the Device on page 38.

Procedure

1.From the main page, click ‘Configuration’. The ‘Configuration maintenance’ page appears.

2.Click ‘Reset factory settings’.

Note: This procedure will return the default IP address of the Diva 2430 to 192.168.1.1. If you changed the IP address of the Diva 2430 from this default setting, you will lose contact with the web configuration interface after the reset is completed. To get back to ‘Main Configuration’ menu, enter 192.168.1.1 in your browser’s URL field and press Enter.

Image 46

Contents Diva 2430 Adsl Modem Fourth Edition March 206-362-04 Contents Introduction This SectionHardware Features Setup and Configuration FeaturesAdsl and Network Features Introducing the Diva 2430 Adsl ModemPackage Contents Setup Hardware Requirements Connecting to Both PortsOverview Software RequirementsConnecting the Microfilters Connecting MicrofiltersAbout Microfilters USB Setup Windows 2000, or Windows MeProcedure Connect the CablesInstall USB Drivers Setup USB Setup Test Internet Access Ethernet Setup Adsl Test Internet Access Optional Install the Diva Assistant Setup Optional Install the Diva Assistant LAN Setup Setup LAN Setup Configuring Settings via the Web Interface Logging into the Web-based Configuration InterfaceUsing the Configuration Menus ATM Settings Adsl Settings TCP/IP Setup Windows 95/98 Windows NT Windows Macintosh Mac OS 8 or later Can’t access the Internet TroubleshootingCan’t access the web-based configuration interface Power light is blinking red Using your Diva About the Diva Assistant Launching the Diva AssistantSystem Tray Icon General TabPerformance Tab Diagnostic Log TabTools Tab Indicator Lights Reset Settings to Factory Defaults Resetting the DeviceNormal Reset Boot Monitor ModeWeb-based Configuration Interface Web-based Configuration Interface Overview Starting the Web-based Configuration Interface ‘Reset’ and ‘Logout’ buttons on the main menu ‘Save’, ‘Reset Form’, and ‘Cancel’ ButtonsGetting Help Saving and restoring configuration files Upgrading Firmware Backing up Configuration FilesOpening to the Firmware Maintenance Retrieving Firmware from the Eicon Networks Web SiteUploading New Firmware Resetting to Factory Defaults Advanced Topics Security Automatic Log Out Setting a Password System passwordErasing the system password Disable Inbound Server Requests Enabling this OptionIP Traffic Only Virtual Private Networking Setting up a VPN with Windows 95 or WindowsBefore you Begin Setting up a VPN with Windows Advanced Topics Virtual Private Networking Advanced Topics Virtual Private Networking Dialing the VPN Specifications and Regulatory Information Specifications General SpecificationsSoftware and Firmware Specifications UBR CBR Regulatory Information Declaration of Conformity Regulatory Information for the United StatesFCC Part 68 Notice Safety Notice Regulatory Information for Canada Power Consumption Safety Status TNV-3Regulatory Information for the European Union Index Index