Eicon Networks Diva 2430 manual Starting the Web-based Configuration Interface, Procedure

Page 41

Web-based Configuration Interface: Starting the Web-based Configuration Interface

Page 41

Starting the Web-based Configuration Interface

Only one user can access the web-based configuration interface at a time.

Procedure

1.If you installed the Diva Assistant, double-click the icon in the Windows system tray, click the ‘Tools’ tab, then click ‘Configure’.

If you do not have access to the Diva Assistant, start your web browser and click ‘File’, ‘Open’. Type 192.168.1.1 and click ‘OK’.

Note: The IP address 192.168.1.1 is the default IP address for the Diva 2430. If you have changed the IP address, you must use the new address.

2.You will see the ‘Log In’ page.

3.Enter the system password, if required, and click ‘Log In’. By default, there is no password.

Image 41

Contents Diva 2430 Adsl Modem Fourth Edition March 206-362-04 Contents This Section IntroductionAdsl and Network Features Setup and Configuration FeaturesHardware Features Introducing the Diva 2430 Adsl ModemPackage Contents Setup Overview Connecting to Both PortsHardware Requirements Software RequirementsAbout Microfilters Connecting MicrofiltersConnecting the Microfilters Windows 2000, or Windows Me USB SetupConnect the Cables ProcedureInstall USB Drivers Setup USB Setup Test Internet Access Ethernet Setup Adsl Test Internet Access Optional Install the Diva Assistant Setup Optional Install the Diva Assistant LAN Setup Setup LAN Setup Logging into the Web-based Configuration Interface Configuring Settings via the Web InterfaceUsing the Configuration Menus ATM Settings Adsl Settings TCP/IP Setup Windows 95/98 Windows NT Windows Macintosh Mac OS 8 or later Can’t access the web-based configuration interface TroubleshootingCan’t access the Internet Power light is blinking red Using your Diva Launching the Diva Assistant About the Diva AssistantGeneral Tab System Tray IconTools Tab Diagnostic Log TabPerformance Tab Indicator Lights Normal Reset Resetting the Device Reset Settings to Factory Defaults Boot Monitor ModeWeb-based Configuration Interface Web-based Configuration Interface Overview Starting the Web-based Configuration Interface Getting Help ‘Save’, ‘Reset Form’, and ‘Cancel’ Buttons‘Reset’ and ‘Logout’ buttons on the main menu Saving and restoring configuration files Opening to the Firmware Maintenance Backing up Configuration FilesUpgrading Firmware Retrieving Firmware from the Eicon Networks Web SiteUploading New Firmware Resetting to Factory Defaults Advanced Topics Security Automatic Log Out Erasing the system password System passwordSetting a Password Enabling this Option Disable Inbound Server RequestsIP Traffic Only Before you Begin Setting up a VPN with Windows 95 or WindowsVirtual Private Networking Setting up a VPN with Windows Advanced Topics Virtual Private Networking Advanced Topics Virtual Private Networking Dialing the VPN Specifications and Regulatory Information General Specifications SpecificationsSoftware and Firmware Specifications UBR CBR Regulatory Information FCC Part 68 Notice Regulatory Information for the United StatesDeclaration of Conformity Safety Notice Regulatory Information for Canada Regulatory Information for the European Union Safety Status TNV-3Power Consumption Index Index