Abit KV8 PRO user manual Pdif Out

Page 19

Hardware Setup	2-11

(7). Front Panel Audio Connection Header

This header provides the connection to audio connector at front panel.

•To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis.

•To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at pin 5-6, and pin 9-10 (default setting).

	Pin	Pin Assignment	Pin	Pin Assignment
	1	Audio Mic.	2	Ground
	3	Audio Mic. Bias	4	VCC
	5	Speaker Out Right	6	Speaker Out Right
	5	Channel	6	Channel Return
		Channel		Channel Return
	7	X	8	NC

	9	Speaker Out Left	10	Speaker Out Left
	9	Channel	10	Channel Return
		Channel		Channel Return

	11	Ground	12	S/PDIF In
	13	VCC	14	S/PDIF Out

User’s Manual

Image 19

Contents KV8 Pro KV8 Pro Copyright and Warranty NoticeTable Of Contents Install VIA USB 2.0 Driver Save & Exit Setup Exit Without SavingInstall Audio Driver Install LAN DriverOn board VT6122 10/100/1000 Mb PCI Ethernet Controller Features & SpecificationsIntroduction Introduction2x USB headers 1x CD-IN, 1x AUX-IN header Back Panel I/OLayout Diagram KV8 Pro Install The Motherboard Hardware SetupHardware Setup Install CPU and Heatsink Total System Memory 128MB ~ 2GB User’s Manual Install System Memory128MB ~ 1GB Bank 2, 3 DIMM2Chapter Connectors, Headers and Switches FAN Connectors Page USBPWR1 Page VCC Pdif Out Internal Audio Connectors Page Chapter Hardware Setup IDE Connectors Post Code Display Page Chapter Hardware Setup System Management Bus Headers AUDIO1 Bios Setup Bios SetupChapter User Define ΜGuru UtilityChapter Temperature Monitoring Back to µGuru Utility Setup MenuVoltage Monitoring Beep Temp This item selects the warning temperature limitFan Speed Monitoring FanEQ Control Standard Cmos Features Back to Standard Cmos Features Setup Menu Page Hard Disk Boot Priority Advanced Bios FeaturesPage Advanced Chipset Features Back to Advanced Chipset Features Setup Menu Dram Timing Selectable Bios Setup OnChip IDE Device Click Enter key to enter its submenu Integrated PeripheralsBack to Integrated Peripherals Setup Menu Back to Integrated Peripherals Setup Menu Power Management Setup Resume by Ring Page Back to PnP/PCI Configurations Setup Menu PnP/PCI ConfigurationsResources Controlled By PCI-1 PCI-2 PCI-3 PCI-4 PCI-5 PCI slot 1 shares IRQ signals with AGP slotSave & Exit Setup Load Fail-Safe DefaultsLoad Optimized Defaults Set PasswordInstall VIA 4-in-1 Driver Appendix A. Install VIA 4-in-1 DriverFollowing screen appears Click Next Click Yes User’s Manual Appendix a Appendix B. Install Audio Driver Appendix B Appendix C. Install LAN Driver Appendix C Appendix D. Install VIA USB 2.0 Driver Click Yes Click OK Click Print to File KV8 Pro Install VIA Serial ATA RAID Driver Appendix E. Install VIA Serial ATA RAID DriverClick Next User’s Manual Appendix E Install Abit µGuru Driver Appendix F. Install Abit µGuru DriverAppendix F Award Post Code Definition Appendix G. Post Code DefinitionScreen logo InsteadInitialize the Apic for P6 class CPU Assign resources to all ISA PnP devices Set up floppy related fields in 40hardwareInitialize InitOnboardSuperIO Initialize InitOnbaordAUDIOProgram boot up speed Enable/Disable Parity Check according to Cmos setupRead HDD boot sector information for Trend Anti-Virus code Enable L2 cacheAC2003 Post Code Definition KV8 Pro Appendix H. Troubleshooting Need Assistance? Appendix H User’s Manual Motherboard Model No OS/Application Hardware Name Brand SpecificationsProblem Description KV8 Pro ModelHow to Get Technical Support Appendix I. How to Get Technical SupportAlt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuilt AppendixFax 43-1-7346713 asguard@asguard.at Thank You Abit Computer Corporation